Mixer of terrestrial signals 3 inputs: VHF-UHF-UHF Televés

3-input mixer for different terrestrial bands. It incorporates an orange box for external installation, directly on the mast. It allows the passage of current from the output to one of the UHF inputs, to power a mast amplifier or a BOSS system.

The EasyF is an innovative concept of connection of the internal conductor of the coaxial cable (live), which is inserted directly into the device increasing the reliability of the connection. Furthermore, thanks to the absence of "F" connectors, it is possible to reduce the chassis and secure the connection of two cables with a single screw.

Characteristics of the 3-input terrestrial signal mixer: VHF-UHF-UHF:
- Real time savings: speeding up the installation is possible, as it is not necessary to make the connectorization of the coaxial cables. In addition, the process of threading the connectors on the device is avoided, which is sometimes complicated when space is not enough.
- Connection reliability: the cable tie that holds the cables prevents the coaxial from loosening
- Cost savings: no additional connector (neither "F" nor "CEI") is needed
- Space optimization: inputs and outputs are always located on the same side of the device, avoiding bending of coaxial cables and facilitating work inside cabinets and registers

With EasyF, the connection of the coaxial cable in the device is made by an automated system of insertion of the live (internal conductor) by contact, without requiring soldering.
- Like the first day: the life of the device increases by eliminating the possible deterioration of the welds with the passage of time
- Reduction in the failure rate: generally caused by cold welding
- Optimization of electromagnetic behavior: at high frequencies
- Reinforcement of our commitment to the environment: pollution caused by the welding process is eliminated and electricity consumption in production is reduced

Mounting:
Very simple assembly in three steps: it is only necessary to screw and unscrew the covers to connect two cables:
1. Unscrew the cover of the device to access the connection
2. Insert previously stripped coaxial cables
3. Close the cover and screw to secure the connection

* All the technical characteristics in the technical sheet