360º Bluetooth detector recessed in white ceiling

The detector can be configured in 3 operating modes: Motion Detector, Presence Detector or Twilight Switch. Original Cepo Push in connection terminal (direct insertion). Savings in installation assembly of 60%. ZCT (Zero Crossing Technology), “zero crossing” switching in the closing and opening of the 16A relay, which allows the control of large loads without damaging its relay. NO or NC contact status selectable from the APP. Configuration and adjustment through APP from your Smartphone via Bluetooth. Valid for all types of loads: LEDs, Fluorescence, etc. Elegant and clean design without physical potentiometers. Application examples: neighborhood communities, toilets...

Characteristics of the 360º Bluetooth detector recessed in a white ceiling:
- Supply Voltage (V): 230V.
- Frequency (Hz): 50/60.
- Own Consumption: <,1W.
- Output Channels: 1.
- Load Type: 16A cos φ = 1.
- Relay cutting power ( A): 16A.
- LED lamps (W): 400W.
- Incandescent and 230V Halogens (W): 3000W.
- 12V Halogens with electronic transformer (W): 3000W.
- Halogens with ferromagnetic transformer (W): 2400W.
- Maximum absorption current per 1/10V (mA): 0.
- Maximum number of devices: 0.
- Voltage-free contact: No.
- Detection Angle (º): 360.
- Mounting height (m): 2.5.
- Detection diameter (m): 7.
- Minimum timing (seconds): 1 second.
- Maximum time delay (minutes): 60.
- Brightness level (lux) (min): 5.
- Brightness level (lux) (max): 2000.
- Assembly: Recessed in ceiling.
- Fluorescent Lamps (VA): 1300W (130µF).
- Accepts contactor: Yes.
- Zero crossing: Yes.
- Operating Temperature (ºC) (min ) : -10.
- Operating Temperature (ºC) (max): 45.
- Environmental Protection: IP40, Class II.