360º Bluetooth surface detector on silver ceiling

“3 in 1” indoor detector, for recessed ceiling mounting with the following operating modes: motion detector, presence detector and twilight switch. It has a switching channel with a 16A relay. ZCT (Zero Crossing Technology), “zero crossing” switching, which allows the control of large loads without damaging its relay. Highly sensitive PIR sensor, which detects the smallest movement within its coverage area. Possibility of connecting several detectors in parallel to expand the detection area. It incorporates a red LED indicator that helps test the correct motion detection of the device. It incorporates a blue LED indicator to identify that the detector has Bluetooth activated. Configuration and adjustment through the DINUY CONFIGURE App.

Characteristics of the 360º Bluetooth Detector with silver ceiling surface:
- Supply Voltage (V): 230V.
- Frequency (Hz): 50/60.
- Own Consumption: < ;,1W.
- Output Channels: 1.
- Load Type: 16A cos φ = 1.
- Relay cutting power (A): 16A.
- LED lamps ( W): 400W.
- Incandescent and Halogen 230V (W): 3000W.
- Halogen 12V with electronic transformer (W): 3000W.
- Halogen with ferromagnetic transformer (W): 2400W.
- Maximum absorption current per 1/10V (mA): 0.
- Maximum number of devices: 0.
- Voltage-free contact: No.
- Detection Angle (º): 360 .
- Mounting height (m): 2.5.
- Detection diameter (m): 7.
- Minimum timing (seconds): 1.
- Maximum timing (minutes): 60 .
- Brightness level (lux) (min): 5.
- Brightness level (lux) (max): 2000
- Mounting: Ceiling surface.
- Fluorescent Lamps (VA): 1300W (130µF).
- Contactor supported: Yes.
- Zero crossing: Yes.
- Operating Temperature (ºC) (min): -10.
- Operating Temperature (ºC) ) (max): 45.
- Environmental Protection: IP40, Class II.