Brand: DINUY
Reference: DM TEC PA1
360º ceiling motion detector with special coverage for corridors. Motion detector, with PIR technology, for recessed ceiling installation, specially developed for installation in narrow and long areas, such as corridors.
- Motion detector, with PIR technology, for recessed ceiling installation, specially developed for installation in narrow and elongated areas, such as corridors.
- Automatic lighting control based on movement and natural light.
- Adjustable timing and brightness level using potentiometers or remote control (EM MAN DM0). Adjustable sensitivity by remote control.
- Coverage: 22m x 4m at 2.5m in height and transverse movement.
- Zero-crossing switching to protect the relays and to switch high lighting powers.
- Valid for all types of lamps, including LEDs and Fluorescence.
- Application examples: hotels, schools, hospitals, etc ...
Features of the 360º ceiling motion detector with special coverage for corridors:
- Mounting: Recessed in Ceiling
- Detector Type: Special for corridors
- Power: 230V ~ ± 10º% 50Hz
- Cutting Capacity: 16A cos? = 1
- Maximum incandescence load: 3000W
- Maximum 230V Halogen load: 3000W
- Maximum load Halogen MBT (Ferromagnetic): 2400W
- Maximum load Halogen MBT (Electronic): 3000W
- Maximum Fluorescence Load: 1300VA (100µF)
- Maximum load of PL lamps: 18x7W 12x11W 10x15W 10x20W 10x23W
- Maximum LED load: 400W
- Contact: Supports contactor
- Maximum Coverage: 22m x 4m with Transverse movement at 2.5m height13m x 4m with Direct movement at 2.5m height
- Timing: 6sec ~ 12min
- Brightness: 3 ~ 100Lux
- Sensitivity: Adjustable by remote control (EM MAN DM0)
- Operating temperature: -10ºC ~ + 40ºC
- Internal Consumption: <, 1W
- Protection Index: IP40
- Slaves: No
360º ceiling motion detector accessory with special coverage for corridors:
- EM MAN DM0 - IR Remote Control for adjusting the Parameters:
IR remote control for adjusting the parameters of the detectors.
It allows the adjustment of: Timing and Lightness.
Mainly it provides 3 advantages:
Savings in installation time.
Same settings on all detectors in the same installation.
It cancels the potentiometers which avoids unwanted manipulations.