More informationPass box with two CEI connectors. The one on the left is a male CEI for FM (radio) and terrestrial TV, and the one on the right is a female CEI for satellite TV (FI). It has a signal pass so it allows a series installation of several sockets. In addition, due to its losses, it is suitable to be installed on floor 2 approx.
Main characteristics of the 8 / 10dB + DC step box:
- Automated manufacturing in robotic line
- High shielding
- Great isolation between outputs
- Made of Zamak, highly resistant
- DC pass from the SAT connector to the input, and bidirectional between the input and the pass-through output
- Compatible with coaxial cables with sheath diameter Ø 5 ... 7mm
Advantages:
- The live is connected by simple push, there is no need to tighten any screw, but with an equivalent clamping force.
- Supports live diameters between 0.65 to 1.2mm and outer cable diameters from 5 to 6.9mm
- Conical guide, "F" connector type to easily insert the piping
- Wide margin in the length of the piping (5 to 15mm) that hinders the shorts between piping and mesh
- Tilting and self-supporting clamp with full opening
- The clamp consists of 3 rows serrated in 9mm for a perfect fastening of the mesh
- Drilling of the printed circuit to make compatible the fixing screw of the trims
- Rounded edges to avoid cuts
- Class A shielding
8 / 10dB + DC step box technical characteristics:
- Type: A10-SAT
- Band:
MATV (5-862MHz)
SAT-FI (950-2150 / 2150-2400MHz)
- Connector:
"CEI" Male
“CEI” Female
- Anchoring method: No screws
- Pass-through: No
- DC step (24V - 350mA):
SAT → Entry
Output → Input