AC TAC-22 electric car charging station with 5 meter cable and RFID Abb

The Terra AC wall charger provides smart and personalized network charging solutions for any business, home or location.

Key features and benefits of the TAC-22 AC car charger with 5 meter cable and Abb RFID :
- Enabled for remote software updates to ensure optimal performance while minimizing the need for on-site intervention.
- Wide range of connectivity options including WiFi, Bluetooth and Ethernet for easy control and easy integration with existing infrastructure.
- Smart functionality means the wall charger can adapt your energy usage and deliver optimized charging, today and in the future.
- Configured for meter integration of energy to offer dynamic load management, which reduces energy costs and avoids the nuisance tripping of protection devices.
- Has been evaluated and tested by org Independent safety nizations to meet the highest standards.
- Current limiting protection allows maximum charging power without nuisance tripping, consistent with the design of a building's electrical distribution system.
- Built-in protections, including DC ground fault and surge protections, protect both the user and the vehicle.
- The app enables simplified charger setup and also allows users to identify their charger through the app mobile or RFID card. Configuration is easily done via the ABB mobile app or web portal. With the app you will also know the status of the charge through the mobile application and it provides you with information about the status of the chargers.
- Ready for integration with an advanced energy system for smart buildings

Future flexibility:
- Built-in energy meter
- Configuration for integration of external energy meters for dynamic load management
- Ready for integration with advanced smart building energy system
Built-in safety:
- Overcurrent
- Overvoltage and undervoltage
- Earth fault
- Overload protection
- PE continuity monitoring (protective earth)
Connector:
- Type 1 and type 2 cable
- Type 2 plug with or without shutter
- No need for an extra hook, the attached cable can be wrapped around the charger< br>- Terra AC Wallbox

Design:
- IEC variants: Single phase up to 7.4 kW / 32 A or Three phases up to ta 22 kW / 32 A
- UL variants up to 19 kW / 80 A
- NEMA 4 and 4X enclosure
- All variants: IP54, IK10

Connectivity:
- Ethernet RJ45
- Bluetooth
- Wifi
- 4G variants
- RS485/P1 for connection to energy meter
- OCPP1.6
- Authentication via App or RFID
- Configuration via App or the ABB web portal

Technical characteristics of the AC TAC-22 car charger with 5 meter cable and Abb RFID:
- Type of charge: Mode 3 charge
- Rated input/output current and power:
- IEC ratings: Three-phase up to 22 kW/32 A
- Input/output voltage: Three-phase: 380 … 415 V, 50/60 Hz
- Mains type: TT, TN, IT
- Type of plug or socket: Type 2 plug with cover
- Type 2 cable. The cable can be wrapped around the charger
- Cable included: Yes, 5 meters
- Protection: Overload, overvoltage, undervoltage, differential protection 30mA including protection 6mA direct current and protection against s built-in transient surges.
- Overvoltage category: III
- Energy metering: Class B (+/- 1%) revenue grade energy meter, MID certified for variants that include it
- Mobile communication with connector: EU nanoSIM: GSM, 4G, LTE, WCDMA
- Available configurable contacts: 1 input, 1 output
- Connectivity: WiFi, Ethernet (RJ45), Bluetooth, RS485/P1, 4G/3G
- User authentication: ABB RFID card (1 included) or mobile application
- User interface: Mobile application, ABB web portal
- Communication protocols: OCPP 1.6 and RS485/P1 for connection of an energy meter
- Status indication: 5 multicolored LEDs
- Software update: OCPP 1.6, ABB web portal or app
- Control and configuration: ABB web portal or app
- Duration: 10 years. 16h charging, 8h standby, 5 charging sessions per day
- Rating: IP and IK IP54, IK10 (IK8+ for -35 to -30°C operating temperature)
- Operating altitude: 4000 m
- Operating temperature range: -35...+50 °C (derating may apply)
- Storage temperature range: -40...+80 °C (derating factor)
- Mounting: On the wall or on the floor with a pedestal
- Dimensions: 320 x 195 x 110 mm
- Safety standards: IEC/EN 61851-1, IEC/EN 62311, IEC/UL 62479, IEC/UL 62955
- Codes and standards:
IEC 61851-21-2, EN 61000-6-1, EN 61000-6-2, EN 61000-6-3, EN 61000-6- 4, EN 61000-3-2, EN 61000-3-3, EN 61000-3-11,
EN 61000-3-12
CE NETWORK- WLAN/RFID/E-UTRA: EN 300 328 V2 .1.1, EN 300 330 V2.1.1, EN 301 908-1 V11.1.2, EN 301 908-13
EN 50470-1, EN 50470-3
FCC Part 15 Class B
ENERGY STAR< br>Certification CE, CB, MID