AC TAC-22 wireless electric car charger with display and RFID Abb

Main features and benefits of the TAC-22 AC electric car charger without cable with display and RFID:
- Enabled for remote software updates to ensure optimal performance while minimizing the need for intervention at the facilities.
- Wide range of connectivity options including WiFi, Bluetooth and Ethernet for easy control and integration with existing infrastructure.
- Smart functionality means the wall charger can adapt its power usage and deliver fast charging optimized, today and in the future.
- Configured for the integration of an energy meter to offer dynamic load management, which reduces energy costs and avoids annoying activations of protection devices.
- It has been evaluated and tested by independent safety organizations to meet the highest standards.
- Current limiting protection allows for maximum load power without disruptive drives, in line with the design of the electrical distribution system of an building.
- Integrated protections, including against DC ground faults and surges, protect both the user and the vehicle.
- The app allows simplified configuration of the charger and allows users to identify their charger via mobile app or RFID card. Configuration is simple via the ABB mobile app or web portal. With the app you will also know the charging status through the mobile application and it provides you with information about the status of the chargers.
- Ready for integration with an advanced energy system for smart buildings

Future Flexibility:
- Built-in energy meter
- Configuration for integration of external energy meters for dynamic load management
- Ready for integration with advanced smart building energy system

Built-in safety:
- Overcurrent
- Overvoltage and undervoltage
- Ground fault
- Overload protection
- PE continuity monitoring (protective earth)
Connector:
- Type 1 and Type 2 cable
- Shutterless type plug
- No need for an extra hook, the attached cable can be wrapped around the charger
- Terra AC Wallbox

Design:
- IEC variants: Three phases up to 11 kW / 16 A
- UL variants up to 19 kW / 80 A
- NEMA 4 and 4X enclosure
- All variants: IP54, IK10

Connectivity:
- Ethernet RJ45
- Bluetooth
- Wifi
- 4G variants
- RS485/P1 for connection to the meter energy
- OCPP1.6
- Authentication via App or RFID
- Configuration via App or the ABB web portal

Technical characteristics of the TAC-22 AC electric car charger without cable with display and RFID:
- Charging type: Mode 3 charging
- Rated input/output current and power:
IEC: Single phase: 184–276 V, 50/60 Hz
UL : Single/ split phase: 208 – 240 V, 50/60 Hz
IEC: Three phase: 320–480 V, 50/60 Hz
- IEC classifications: Three-phase up to 22kW/ 32A
- Voltage input/output: Three-phase: 380 … 415 V, 50/60 Hz
- Network type: TT, TN, IT
- Connector or socket type: Type 2 plug with cover
- Power cable type 2. The cable can be wrapped around the charger
- Cable included: Yes, 5 meters.
- Protection: Overload, overvoltage, undervoltage, 30mA differential protection including 6mA continuous current protection and integrated transient surge protection.
br>- Surge category: III
- Energy measurement: Class B income grade energy meter (+/- 1%), MID Certification for variants that include it
- Mobile communication with connector: nanoSIM UE: GSM, 4G, LTE, WCDMA
- Configurable contacts available: 1 input, 1 output
- Connectivity: WiFi, Ethernet (RJ45), Bluetooth, RS485/P1, 4G/3G
- Authentication of users: ABB RFID card (1 included)
- User interface: Mobile application, ABB web portal
- Communication protocols: OCPP 1.6 and RS485/P1 for connection of an energy meter
- Satus indication: 5 multicolor LEDs
- Software update: OCPP 1.6, ABB web portal or application
- Control and configuration: ABB web portal or application
- Duration: 10 years. 16 hours charging, 8 hours standby, 5 charging sessions per day
- Rating: IP and IK IP54, IK10 (IK8+ for operating temperature -35 to -30°C)
- Operating altitude: 4000 m
- Operating temperature range: -35...+50 °C (derating may apply)
- Storage temperature range: -40...+80 °C (reduction factor)
- Mounting: On the wall or on the floor with a pedestal
- Dimensions: 320 x 195 x 110 mm
- Safety regulations: IEC/EN 61851-1, IEC/EN 62311, IEC/UL 62479, IEC/UL 62955
- Codes and regulations: IEC 61851-21-2, EN 61000-6-1, EN 61000-6-2, EN 61000-6-3, EN 61000-6-4, EN 61000-3-2, EN 61000-3-3, EN 61000-3-11, EN 61000-3-12, CE NETWORK- WLAN/RFID/E-UTRA: EN 300 328 V2.1.1, EN 300 330 V2. 1.1, EN 301 908-1 V11.1.2, EN 301 908-13, EN 50470-1, EN 50470-3, FCC Part 15 Class B, ENERGY STAR, CE Certification, CB, MID