Adjustable floor box for 2 elements in floor installation gray Simon 500 Cima

Within the Simon 500 Cima Collection, we find this adjustable floor box for two elements and installation on a paved floor with Gray finishes. Although designed for recessed installation in flooring, it is suitable for installation on raised floors, which provides versatility to the product by adapting to the technical and functional needs of each room. Manufactured with materials insulated with halogen-free thermoplastic, it facilitates the non-propagation of flame and toxicity in case of fire and can reach maximum temperatures of up to 90 ºC. Once configured, it needs to be combined with a plastic tray (ref. 52052101-035) to enable full installation and thus enjoy all the functionalities and essential features of the Simon 500 Cima range. In addition, if you do not install the same floor covering, the Simon 500 Cima range gives you the possibility of combining it with the trim cover for flushing so that nothing prevents you from fully enjoying the elegance, innovation and safety of Simon 500. Cima.

Characteristics of the adjustable floor box for 2 elements in floor installation Simon 500 Cima:
- Version: 2 elements
- Number of modules: 2 modules
- Finish: Grey
- Expandable: No
- KIT availability: No
- Number of lid opening positions: 2
- Possibility of including quick-connect connectors on the side of the enclosure: No
- Protection against entry of dust and small objects: Yes, thanks to the inclusion of protective foam
- Compatibility: Simon 500 CIMA and Simon 27 Play/Simon K45 mechanisms (via specific adapter)
- Packaging content: Box floor, metal partition, grounding cable, screws and installation manual
- Observation en: To complete the installation of the product, once configured it must be combined with a plastic tray (ref.52052101-035). Optionally, it can be combined with the flush trim cover (ref.52053101-035) in case the same floor covering is not installed.
- Dimensions: 132 x 187 mm
- Depth: 76 mm
- Maximum load: 800 kilos
- Depth adjustment range: Between 76 and 100 mm
- Free space inside the box with minimum adjustment: 13 mm
- Free space inside the box with maximum adjustment: 38 mm< br>- Claw actuation range: Between 14 and 54 mm
- Frame elevation from ground level: 3.2 mm
- Hinged cover dimensions: 105 x 161 x 15 mm
- Customization dimensions flush cap: 66 x 154 x 8 mm
- Heat resistance: +125ºC (according to IEC 60695-10-2)
- Extinguishing: +850ºC / 30 seconds (GWFI according to IEC 60695-2- 11)
- Insulation resistance: >,5 M ? at 500 V
- Dielectric strength: No drilling or flashing with 2000 V at 50 Hz for 1 minute
- Number of side entries: 6
- Number of pre-punches Ø 12.5 mm: 2< br>- Number of pre-punches Ø 20 mm: 2
- Number of pre-punches Ø 26 mm: 2
- Number of flange-holder holes: 2
- Electromagnetic immunity for VDM wiring: Assured by installing the metal partition in the housings provided in the box for this purpose.
- IP Grade: 4X
- IK Grade: 8
- RAL: 7011
- Manufacturing material: Metallic components with self-extinguishing, halogen-free thermoplastic insulation that guarantees non-propagation of flame in the event of fire and low toxicity in the event of smoke emission.