Adjustable floor box for 4 elements in floor installation gray Simon 500 Cima

The adjustable floor box of the Simon 500 Cima series is suitable for 4 electrical elements, comes in gray and is specially designed for recessed installation in the floor. Even so, it can also be installed on raised floors, increasing its use options. Its dimensions are 171 x 187 millimeters and 76 millimeters deep. Its installation is very simple and only requires completing it with the use of a plastic tray (ref.52052102-035). In the case of not installing on the floor covering itself, we recommend the possibility of using a flush trim cover (ref.52053102-035), which will ensure that the product is fully integrated into the room where it is located. The materials used for its manufacture guarantee high quality, since they are based on metallic elements with self-extinguishing, halogen-free thermoplastic insulation that ensure the safety of the installation. These materials are specially designed to prevent the spread of flames if they occur, and reduce the toxicity of the smoke created by them.

Characteristics of the adjustable floor box for 4 elements in gray Simon floor installation. 500 Cima:
- Version: 4 elements
- Number of modules: 4 modules
- Finish: Grey
- Expandable: No
- Availability of KIT: No
- Number of cover opening positions: 2
- Possibility of including quick-connect connectors on the side of the enclosure: No
- Protection against the entry of dust and small objects: Yes, thanks to the inclusion of protective foam
- Compatibility: Simon 500 CIMA and Simon 27 Play/Simon K45 mechanisms (by means of a specific adapter)
- Package content: Floor box, metal partition, grounding cable, screws and installation manual
- Remarks: To be completed product installation, once configured must be combined with a plastic tray stico (ref.52052102-035). Optionally, it can be combined with the flush trim cover (ref.52053102-035) in case the same floor covering is not installed.
- Dimensions: 171 x 187 mm
- Depth: 76 mm
- Maximum load: 1,400 kilos
- Depth adjustment range: Between 76 and 100 mm
- Free space inside the box with minimum adjustment: 13 mm
- Free space inside the box with maximum adjustment: 38 mm< br>- Claw actuation range: Between 14 and 54 mm
- Frame elevation from ground level: 3.2 mm
- Hinged lid dimensions: 145 x 161 x 15 mm
- Customization dimensions flush cap: 107 x 154 x 8 mm
- Heat resistance: +125ºC (according to IEC 60695-10-2)
- Extinguishing: +850ºC / 30 seconds (GWFI according to IEC 60695-2- 11)
- Insulation resistance: >,5 M ? at 500 V
- Dielectric strength: No drilling or flashing with 2000 V at 50 Hz for 1 minute
- Number of side entries: 8
- Number of pre-punches Ø 20 mm: 4
- Number of pre-punches Ø 26 mm: 4
- Number of flange-holder holes: 4
- Electromagnetic immunity for VDM wiring: Ensured by installing the metal partition in the housings provided in the box for this purpose .
- IP rating: 4X
- IK rating: 8
- RAL: 7011
- Manufacturing material: Metallic components with self-extinguishing, halogen-free thermoplastic insulation that guarantee non-propagation of flame in case of fire and low toxicity in case of smoke emission.