Adjustable floor box for 6 elements in floor installation gray Simon 500 Cima

The adjustable floor box for six elements installed on raised floors in gray from the Simon 500 Cima series stands out for its innovative design, which combines with all types of settings, both classic and modern. This product allows us to change the image of the rooms in a few minutes and without the need for professional knowledge for its installation. It has been manufactured with metallic components with self-extinguishing, halogen-free thermoplastic insulation, materials that provide safety, as they guarantee the non-propagation of flame in the event of fire and low toxicity in the event of smoke emission. Its dimensions are 226 x 187 x 92 mm. Another of its great advantages is that once the product has been configured and installed, it can optionally be combined with the flush trim cover (ref.52053103-035) if the same floor covering is not installed.

Characteristics of the adjustable floor box for 6 elements in gray raised floor installation Simon 500 Cima:
- Version: 6 elements
- Number of modules: 6 modules
- Finish: Grey
- Expandable: No
- Availability of KIT: Yes
- Number of lid opening positions: 2
- Possibility of including quick-connect connectors on the side of the enclosure: No
- Protection against entry of dust and small objects: Yes, thanks to the inclusion of protective foam
- Compatibility: Simon 500 CIMA and Simon 27 Play/Simon K45 mechanisms (via specific adapter)
- Packaging content: Floor box, metal partition, socket cable ground, screws and installation manual
- Observations: Once configured and installed The product can optionally be combined with the flush trim cover (ref.52053103-035) if the same floor covering is not installed.
- Dimensions: 226 x 187 mm
- Depth: 92 mm< br>- Maximum load: 1,700 kilos
- Depth adjustment range: Between 92 and 120 mm
- Free space inside the box with minimum adjustment: 29 mm
- Free space inside the box with maximum adjustment: 57 mm
- Claw actuation range: Between 14 and 54 mm
- Frame elevation from ground level: 3.2 mm
- Hinged cover dimensions: 199 x 160 x 15 mm
- Flush cap customization dimensions: 160 x 154 x 8 mm
- Heat resistance: +125ºC (according to IEC 60695-10-2)
- Extinguishable: +850ºC / 30 seconds (GWFI according to IEC 60695 -2-11)
- Insulation resistance: >,5 M ? at 500 V
- Dielectric strength: No drilling or flashing with 2000 V at 50 Hz for 1 minute
- Number of side entries: 12
- Number of pre-punches Ø 12.5 mm: 4< br>- Number of pre-punches Ø 20 mm: 6
- Number of pre-punches Ø 26 mm: 2
- Number of flange-holder holes: 8
- Electromagnetic immunity for VDM wiring: Assured by installing the metal partition in the housings provided in the box for this purpose.
- IP Grade: 4X
- IK Grade: 8
- RAL: 7011
- Manufacturing material: Metallic components with self-extinguishing, halogen-free thermoplastic insulation that guarantees non-propagation of flame in the event of fire and low toxicity in the event of smoke emission.