Automatic switch 1P+N 20A C-curve 6kA Hager

Characteristics of the 1P+N 20A C-curve 6kA automatic switch:
- Neutral position: Right
- Number of protected poles: 1
- Number of poles: 2 P
- Curve: C< br>- With neutral cut-off: Yes
- Number of modules: 2
- Alignment of the upper terminals for modular devices: Aligned terminals
- Alignment of the lower terminals for modular devices: Aligned terminals
- Rated breaking capacity: 6 kA
- Rated AC operating voltage: 230 V
- Type of supply voltage: AC
- Rated frequency: 50/60 Hz
- Rated voltage insulation: 500 V
- Rated impulse withstand voltage: 4000 V
- Rated rated current: 20 A
- Service breaking capacity according to EN60898: 6 kA
- Min/max value of operation of the thermal relay in a.c.: 1.13 / 1.45 In
- Min/max threshold value magnetic relay in a.c.: 5 / 10 In
- Depth of the installed product: 70 mm
- Height of the installed product: 83 mm
- Width of the installed product: 35 mm
- Frequency: 50 to 60 Hz
- Total power dissipated under nominal current conditions: 4.35 W
- Power dissipated per pole: 2..18 W
- Electrical endurance in number of cycles: 4000
- Mechanical endurance in number of maneuvers: 20000
- Upper connection type for modular devices: Terminal with screws
- Tightening torque: 2, 8 Nm
- Lower connection type for modular devices: Double connection terminal
- Connection sec. born. His p. and info. rigid cable: 1 / 35 mm²
- Screw terminal terminal connection section: 1 / 25 mm²
- IP protection index: IP20
- Operating temperature: -25…70 °C

* All the information in the technical sheet