Automatic switch 2P 10A curve-C 6kA Hager

Characteristics of the 2P 10A C-curve 6kA circuit breaker:
- Number of protected poles: 2
- Number of poles: 2 P
- Type of poles: 2 P
- Curve: C
- With neutral cut-off: No
- Number of modules: 2
- Alignment of the upper terminals for modular devices: Aligned terminals
- Alignment of the lower terminals for modular devices: Aligned terminals
- Rated breaking capacity: 6 kA
- Rated AC operating voltage: 400 V
- Type of supply voltage: AC
- Rated frequency: 50/60 Hz
- Rated voltage of insulation: 500 V
- Rated impulse withstand voltage: 4000 V
- Rated rated current: 10 A
- Service breaking capacity according to EN60898: 6 kA
- Min/max operating value thermal relay in a.c.: 1.13 / 1.45 In
- Min/max threshold value magnetic relay in a.c.: 5 / 10 In
- Assigned breaking power 230V 50 Hz: 6 kA
- Assigned breaking power : 6 kA
- Depth of installed product: 70 mm
- Height of installed product: 83 mm
- Width of installed product: 35 mm
- Frequency: 50 to 60 Hz
- Total power dissipated under conditions of nominal intensity: 3.11 W
- Power dissipated per pole: 1.57 W
- Electrical endurance in number of cycles: 4000
- Mechanical endurance in number of maneuvers: 20000
- Type of upper connection for modular devices: Terminal with screws
- Tightening torque: 2.8 Nm
- Type of lower connection for modular devices: Double connection terminal
- Sec. conex. born. His p. and info. rigid cable: 1 / 35 mm²
- Screw terminal terminal connection section: 1 / 25 mm²
- IP protection index: IP20
- Operating temperature: -25…70 °C

* All the information in the technical sheet