More informationMain features of the T-20 automatic staircase timer:
- Installation on a DIN rail, one module wide (17.5 mm).
- Front timing selector.
- Resettable timing.
- Two-position manual control: automatic operation, or ignition that cancels the timing during repair, maintenance or cleaning of the installation.
- Timing from 45 s to 7 min.
- Additional pushbutton neon lamps, up to 50 mA.
- Valid for three or four wire installations.
- Timing by seconds or minutes of the staircase lighting circuit in residential buildings, community patios, etc.
Technical characteristics of the T-20 automatic staircase timer:
- Power supply: 230 V ac ± 10% or 120 V ac ± 10%
- Nominal frequency: 50 - 60 Hz
- Breaking capacity: 10 A 230 V ac
- Degree of protection: IP 20 according to EN 60529
- Conductor section: 4 mm²
- Operating temperature: -10 to +50 ºC
- Quality marks: VDE
- Maximum loads:
Incandescent lamps: 2000 W
Fluorescent: 800 VA
Low voltage halogens: 1200 VA
Halogens (230V AC): 2000 W
Low consumption lamps: 700 VA
Led lamps: 100 VA