Tips for maintaining your toilet

Although toilets do not require much maintenance, some regular care and cleaning is necessary to keep them in good working condition. Also, if leaks, flushing issues, or other problems are noticed with the toilet, it is better to address them immediately rather than ignore the problem, which can lead to more significant damage and further toilet problems.

It is important to take into account these aspects for the care and maintenance of your toilet:

Cleaning products that can damage the toilet.

Frequent cleaning will keep the toilet in good condition; however, it is important to note that some cleaning products may do more harm than good. It is recommended to avoid the use of cleaning products "in the tank", since they can damage the seals of the mechanisms inside the tank that are necessary to flush the toilet.

Instead, keep the toilet clean by regularly flushing a solution down the toilet. Use soap and water to clean the seat and push button.

Check for leaks in the toilet.

A malfunctioning toilet is one whose shut-off valve, which controls the flow of water from the tank to the bowl, has become detached or damaged, causing a continuous transfer of water into the toilet. of the same. Leaky toilets can waste up to two liters of water per minute, quickly adding to your water bill.

How to check for leaks in a toilet?

 Periodically, the following steps must be followed:

1. Place a few drops of food coloring in the water in the tank.

2. Do not use the toilet for 20-30 minutes.

3. Then examine the water in the tank.

4. And if any dye has appeared in the toilet bowl, there is a leak that needs to be addressed.

Unclogging the Toilet Drain

The toilet drain may look wide, but it is actually quite small. Toilets are designed to handle only human waste and toilet paper, so avoid dumping anything else down the toilet.

If the toilet is clogged, follow these steps:

1. Turn off the water with the emergency stopcock located on the wall, behind and below the cistern, to prevent it from overflowing.

2. Use a plunger to try to remove the blockage so that it can be expelled through the pipes.

3. If using a plunger doesn't work, a toilet probe can also be used to clear the clog.

4. In no case should a chemical cleaner be poured into the toilet; aggressive chemicals damage pipes.

5. If you cannot repair a clogged toilet yourself, you should contact a professional plumber for assistance.

See all toilets