Condensate evacuation pump Si-82 Sauermann

The Si-82 centrifugal pump is designed to be easily installed in any environment. It is capable of evacuating up to 500l/h and is suitable for air conditioning units and industrial refrigeration counters. It also tolerates charged, high temperature and acid condensates (pH > 2.5) produced by gas condensing boilers.

Main characteristics of the Si-82 condensate evacuation pump:
- It can evacuate the condensate up to a height of 5 m.
- Up to 500 l/h, reduced operating times.
- Low noise level, silent operation.
- The pump can be installed fixed to the wall, resting on the floor or suspended from the ceiling.
- Easily removable tank and reversible pump to allow installation on the right or left of the application, with the possibility of choosing the condensate outlet side.
- Simple electrical connection: New plug-in power cable that facilitates installation and maintenance.
- Simple hydraulic connection: New non-return valve, ¼ turn, designed to facilitate the connection of tubes Ø int. 10 mm (3/8”).
- 4 Ø 30 mm (1" 3/16) holes for condensate inlet.
- Acid and oil resistant float.
- Mechanical structure shock resistant.

Technical characteristics of the Si-82 condensate evacuation pump:
- Maximum flow: 500 l/h
- Maximum discharge height: 5.0m
- Pressure maximum: 5.4 m (debit=0)
- Acoustic level at 1 m: ≤ 45 dBA (measured in the Sauermann acoustic laboratory, pump installed and running with water)
- Electrical voltage: 230V~ 50Hz - 70 W – 0.67A
- Detection levels: ON: 53mm, OFF: 42mm, AL: 64mm
- Safety contact: NC 8 A resistive - 250 V
- Maximum condensate temperature: 65°C , 80°C short period
- Maximum condensed acids: pH >, 2.5
- Thermal protection: 105°C (automatic reset)
- Duty cycle: 30%: 3s ON – 7s OFF< br>- Protection: IP20
- Safety standards: CE
- RoHS Directive: Compliant equipment
- DEEE Directive: Compliant equipment
- Dimensions: L400xW300xH200 mm
- Weight: 2.5 kg

Kit contents:
- One-piece centrifugal pump with tank
- Integrated tongue end check valve (10 mm external diameter or 3/8")
- Pluggable power and safety cables
- Straight connector (outer diameter 10 mm or 3/8" / 6 mm or 1/4")
- 2 screws + 2 plugs< br>
Applications:
HVAC cabinets, multi-cassette recuperators, conduit machines, gas condensing boilers, gas stoves, refrigerated cabinets, evaporators.