Constant regulation system 1-10V

Main features of the 1-10V constant dimming system:
- Automatic dimming system, based on natural light, for 1-10Vdc luminaires: automatically applies the luminosity level required to maintain a minimum lighting level to the luminaires previously established, compensating for natural light at all times.
- It incorporates a Motion Sensor (optional), which allows lighting activation to be limited to the presence of people.
- Adjustment of the minimum regulation level, avoiding turn off the lights completely.
- Relay output to disconnect and turn off the lights completely.
- Possibility of expanding the motion detection area using Slave Sensors “DM SEN T03”.
- Switching and manual regulation by pushbutton/switch, using the “AC DMS 001” accessory.
- Recessed mounting in false ceiling.

Technical characteristics of the 1-10V constant regulation system:
- Voltage from Power supply: 230VAC
- Frequency: 50/60Hz
- Output channels: 1
- Relay breaking capacity: 16A
- Type of connection terminals: Elevator
- Cable section: 2.5mms
- Storage temperature (min): -30ºC
- Storage temperature (max): 701C
- Minimum timing: 10 minutes
- Maximum timing: 30 minutes
- Angle Detection Range: 360º
- Mounting Height: 2.5m
- Detection Diameter: 7m
- Own Consumption: 2W
- Load Type: Ballast or Driver 1/10Vdc
- Number Maximum extra motion sensors: 14
- Light level (min): 100lux
- Light level (max): 1000lux
- Maximum absorption current per 1/10V: 500mA
- Maximum injection current per 1/10V: 250mA
- Maximum number of devices: 80
- Mounting: Recessed in ceiling
- Installation: Recessed in ceiling
- Operating temperature (min): 0ºC
- Temperature Operating Temperature (max): 40ºC
- Environmental Protection: IP20 according to UNE 20324
- According to the s Directives: Low Voltage 2014/35/EU, Electromagnetic Compatibility 2014/30/EU, 2011/65/EU
- In accordance with the Standard: UNE-EN 60669-1:2018, UNE-EN 60669-2- 1:2005, +erratum:2008, +/A1:2010, +/A12:2011, UNE-EN 60669-2-3:2007