Contactless push button for embedding

Contactless pushbutton with elegant design with blue lighting in standby and green in detection. Made of 1.7mm stainless steel, with a detection range of 7cm and compatible with standard mechanism boxes. The button is activated during the detection time of the hand in proximity, without the need for physical contact.

Hall button:
The new FERMAX contactless exit button is activated simply by bringing your hand closer. With this solution it is no longer necessary to touch to activate it, therefore reducing the risks of contagion. Power supply from the street panel simplifies installation.

Call button:
The contactless button can also be used as a doorbell, activating a doorbell or being connected directly to one of the FERMAX monitors with doorbell function, to carry out the DING-DONG function of the home entrance button. It is necessary to power the push button from an external power source.

Installation:
Since it has an active detection circuit, this contactless push button requires a power supply. Therefore, it will be necessary to install 2 wires that feed the button from a 12 to 24Vdc power source. In the FERMAX street panels there is a 12Vdc output available that can be used for this purpose. In addition, the usual 2 wires of any push button will be necessary, which will activate the bell or desired device, making a short through a relay. The installation of the push button can be recessed, being compatible with universal mechanism boxes, or on the surface with the optional surface box.

Accessories (not included):
- Ref. 5208 - Installation box contactless push button surface
- Ref. 4813 - 12vdc/2a power supply