Daikin Altherma heat pump set

Daikin Altherma is a very high efficiency air-to-water heat pump capable of providing heating, cooling and domestic hot water all year round. By extracting free energy from the air, it is capable of achieving efficiencies of more than 500%, which is equivalent to 80% savings compared to a traditional heating system.

The system is used together with the heat emitters chosen by the end user, such as: underfloor heating, low and high temperature radiators and / or fan coil units.

Integrated design: The new indoor unit has been reduced in size to integrate the Hydrokit and the Accumulator into a single unit, achieving a more compact and aesthetic result.

Maximum energy efficiency:

The Daikin Altherma Air-to-Water Heat Pump uses a fully renewable energy source, as it extracts heat from the outside air. The system is based on a closed circuit through which refrigerant circulates and in which a thermodynamic cycle is created through processes of evaporation, condensation, compression and expansion.

A Heat Pump "pumps" heat to a high temperature level. Finally, the heat energy generated is transferred to the water distribution system (underfloor heating, low temperature radiators and / or fan coil units for low temperature heating systems and high temperature radiators for high temperature heating systems) from the home through a heat exchanger.

Depending on the model and conditions, a Daikin Altherma air-to-water heat pump generates about 3 kWh of useful heat for every kWh of electricity it consumes. This means that approximately 2/3 of the heat needed to heat the home comes completely free.

Daikin Altherma Overpowered RF Components:

The outdoor unit is compact, resistant to severe climates and contains an inverter controlled compressor that increases energy efficiency and allows temperature regulation. Its operation of the Heat Pump: heats the home and produces domestic hot water with outdoor temperatures down to -20 ° C.

The indoor unit has a built-in backup electric heater to provide additional capacity on colder days or as a backup system in case there is a problem with the outdoor unit. Faucet two shut-off valves, one for the inlet and the outlet of water. It's compact and easy to install, components come pre-installed, and all parts of the interior of the unit are easy to access, making it easy to maintain. It can be installed on the wall, just like a gas boiler.

Sanitary Hot Water Tank (DHW) water inside the tank is heated mainly by thermal energy, thanks to a heat exchanger that is connected to the heat pump.

Fancoils Temperature-Water units perfect combination:

The FWXV15A and FWXV20A Fancoils They are much more than a fan coil unit or any other thermal emitter. It can provide both heating and air conditioning and offers optimal levels of energy efficiency when connected to a Daikin Altherma low temperature system, together with the EKVKHPC 2-way valve, the perfect partner for the Daikin altherma series. (Optional).

Daikin Altherma advantages:

- Heating, cooling and domestic hot water in a single system

- Maximum energy rating

- Reduction in the heating bill

- Reduction of CO2 emissions

- Comfort guaranteed all year round

- Combinable with other energy sources

What does the Daikin Altherma BIWF1118CBV heat pump set include?

- Outdoor unit ERLQ011CV3

- Hydrokit EHVX11S18CB3V (Accumulator volume 180 liters)

- EKRUCBL3 remote control

- Drain tube EKDK04

Technical characteristics of the Daikin Altherma heat pump set:

Single phase overpowered outdoor unit ERLQ011CV3
- Nominal heating capacity: 11 kW

- Nominal cooling capacity: 11.7kW

- Heating consumption: 3.1 kW

- Consumption in refrigeration: 4.31 kW

- Energy efficiency class 55ºC: A +

- Energy efficiency class 35ºC: A ++

- Air flow: 5400 m3 / h

- Refrigerant: R410A 3.4 kg

- Compressor: SCROLL

- Refrigerant connection: 3/8 "-5/8"

- Refrigerant lines distances: 3 <, d <, 50

- Sound pressure cold / hot / silent: 50/51/45 dB (A)

- Hot / cold sound power: 64/64 dB (A)

- Power supply: l / 220 V (single phase)

- Dimensions: 1,345 mm high x 900 mm wide x 320 mm deep

- Net weight: 113 kg

Integrated indoor unit Hydrokit and accumulator EHVX11S18CB3V

- Capacity: 180 liters

- Hot / cold sound pressure: 28/28 dB (A)

- 3V backup heater: 3kW - 2 stages -l / 230V

- LOT2 load profile: L

- LOT2 energy efficiency class: A

- Dimensions: 1732 mm high x 600 mm wide x 728 mm deep

- Net weight: 119 kg

BRC1HHDW control knob features:

- Stylish and elegant design

- Intuitive and elegant

- Bluetooh connection

- Basic functions: Allows on / off of climate and DHW, adjusting the comfort temperature and reading of DHW tanks.

- Available in 3 colors to suit any interior design

Recommended accessories:

- ERLQ outdoor unit condensate collection tray (004/006/008), Ref .: EKDP008C

- Heating tape for condensate tray EKDP008C, Ref .: EKDPH008C

- Separating feet to prevent snow accumulation ERLQ units (004/006/008), Ref .: EKFT008CA

- Snow canopy units ERLQ (011/014/016), Ref .: EK016SNC

- Heating tape for ERHQ unit box (011/014/016). Required EKRP1HBA, Ref .: EKBPHTH16A

- Drain kit for ER (L / H) Q units (011/014/016), Ref .: EKDK04

- Single-phase energy meter, Ref .: K.ELECMETV

- Three-phase energy meter, Ref .: K.ELECMETW

- Remote sensor for outside temperature, Ref .: EKRSC1

- Remote sensor for indoor temperature, Ref .: KRCS01-1

- EHBX hydrokits drainage tray. For cold operation only, Ref .: EKHBDPC2

- LAN Controller (optional), Ref .: BRP069A62

- LAN Controller + Photovoltaic (optional), Ref .: BRP069A61

- Simplified control (optional). Always install in addition to the EKRUCBL3, Ref .: EKRUCBS

- The manufacturer's gas outlets are recommended, check the "gas outlets" section that you will find at the top of this page and in order comments, request the references you need to pass the assessment.