Dali constant regulation system

Main characteristics of the Dali constant dimming system:
- Automatic dimming system, based on natural light, for Dali Luminaires: automatically applies the required brightness level to the luminaires to maintain a previously established minimum lighting level, compensating natural light at all times.
- Unidirectional communication and broadcasting (only one group). It does not allow the individual addressing of luminaires.
- It incorporates a Motion Sensor (optional), which allows lighting activation to be limited to the presence of people.
- Adjustment of the minimum regulation level, preventing them from turning off completely the luminaires.
- Possibility of enlarging the motion detection area using Slave Sensors “DM SEN T03”.
- Manual switching and regulation by Push Button/Switch, using the “AC DMS 001” accessory.< br>- Recessed mounting in false ceiling.

Technical characteristics of the Dali constant regulation system:
- Supply Voltage (V): 230VAC
- Frequency: 50/60Hz
- Channels Output: 1
- Type of connection terminals: Elevator
- Cable section: 2.5mm2
- Storage temperature (min): -30ºC
- Storage temperature (max): 70ºC< br>- Minimum delay: 10 minutes
- Maximum delay: 0 minutes
- Detection angle: 360º
- Mounting height: 2 .5m
- Detection diameter: 7m
- Own consumption: 2W
- Type of Load Ballast or DALI Driver
- Maximum number of extra movement sensors: 14
- Light level (min) : 100lux
- Light level (max): 1000lux
- Maximum number of devices: 64
- Mounting: Recessed in ceiling
- Installation: Recessed in ceiling
- Operating temperature (min ): 0ºC
- Operating Temperature (max): 40ºC
- Environmental Protection: IP20 according to UNE 20324
- According to Directives: Low Voltage 2014/35/EU, Electromagnetic Compatibility 2014/30/ EU, 2011/65/EU
- In accordance with the Standard: UNE-EN 60669-1:2018, UNE-EN 60669-2-1:2005, +erratum:2008, +/A1:2010, +/ A12:2011, UNE-EN 60669-2-3:2007