DHW heat pump Daitsu Heatank V4 AIHD 200L

Heat pump for domestic hot water Daitsu Heatank V4 AIHD 200L, with 1.5 kW of electrical power and high performance, which stands out for its compact design and low energy consumption. This equipment is programmed for wall installation, with a renewed design in white, which adapts to any space in the room without bothering. Its dimensions are 1600mm x Ø640mm.

Aerothermal system for DHW Daitsu Heatank V4 AIHD 200L is manufactured with high quality materials that ensure high energy efficiency of type A+ and high performance, which is achieved thanks to the expansion of the available contact surface between the heat exchanger and the water tank that it contains inside. This Daitsu ACS Heatank V4 aerothermal unit contains an integrated 1.5 kW electrical resistance with a safety thermostat that allows regulating the electrical current and the voltage of the circuit that this heat pump carries, in this way, the flow of energy is controlled.< br>
Daitsu Heatank V4 AIHD 200 L floor air heater uses R290 as refrigerant gas, which is a natural hydrocarbon that has a low impact on the environment and high thermodynamic properties, it also benefits the user by reducing the energy consumption of the equipment in which it is used, compared to conventional refrigerants. This equipment has a low noise level at work and allows for minimal losses due to heat transfer.

Daitsu Heatank V4 AIHD 200-liter heat pump heater has the option of purchasing the WiFi kit to be able to manage the equipment from any mobile device or tablet through the HiTemp application, likewise, it has Modbus type communication, which is an open communication protocol, which is used to transmit the information issued by the "Modbus master" to through serial networks between electronic devices, destined for "Modbus slaves". Daitsu Heatank V4 has an easy installation that adapts to the needs of the user, adapting to any room where you want to place it.

Advantages of the DHW Daitsu Heatank V4 AIHD 200L heat pump:
- Greater adaptability by being able to install it on a wall, saving space for the benefit of the user.
- Greater comfort for the benefit of the user thanks to the low noise level that this pump has.
- Less heat loss due to the special insulation of expanded polyurethane of high thickness and its thick cover that this equipment has.
- Greater safety that also facilitates the installation of the equipment thanks to the overpressure safety valve that it has.
- Greater commitment to the environment by use the R290 refrigerant gas, which has a lower environmental impact, compared to other conventional refrigerants.

Main characteristics of the DHW Daitsu Heatank V4 AIHD 200L heat pump:
- Floor standing installation.
- Low noise level and minimal losses due to heat transfer.
- High operating range, from -5°C to 43°C.
- Production of domestic hot water with an outdoor temperature of up to -10ºC.< br>- Integrated 1.5kW electrical resistance with safety thermostat.
- Overpressure and overtemperature safety valve included
- Condensate tray and tube included to facilitate installation, guaranteeing the design.
- Warranty: 3 years

Technical characteristics of the DHW Daitsu Heatank V4 AIHD 200L heat pump:
- Heating power: 1.5kW
- Tank capacity: 200L
- Power consumption : 0.41kW
- Absorbed current: 1.8A
- Power supply: 230 / 1 / 50V / nº / Hz
- Air discharge: Vertical
- Compressor Type: Rotary
- Air volume: 450m³/h
- Water outlet temperature: 60ºC
- Sound pressure: 43dB (A)
- Operating pressure: 1.3 / 3.2(min/max)Pa
- Sound level: 43dB (A)
- SCOP (EN16147) Average climate: 3.09
- Hydraulic connections: 3/4"
- Energy classification: A+
- Seasonal energy efficiency: 129, 3%
- Load profile: L
- Operating range: -5 ~+43ºC
- Support resistance: 1.5kW
- Refrigerant: R290
- Refrigerant charge: 0 15Kg
- Dimensions: 1600mm x Ø640mm
- Gross weight: 113Kg