Differential switch 4P, 40A, 30mA, AC Hager type

Characteristics of the differential switch 4P, 40A, 30mA, type AC:
- Neutral position: Right
- Number of poles: 4 P
- Mounting: DIN rail
- Number of modules: 4< br>- Rated AC operating voltage: 230 / 400 V
- Rated frequency: 50 Hz
- Rated insulation voltage: 500 V
- Rated impulse withstand voltage: 4000 V
- Rated differential current: 30 mA
- Rated rated current: 40 A
- Resistance to current wave 8/20µs: 0.25 kA
- Closing and breaking power: 1.5 kA
- Current Rated short-circuit conditional Inc according to EN 61008-1: 6 kA
- Depth of installed product: 70 mm
- Height of installed product: 83 mm
- Width of installed product: 70 mm
- Construction dimensions (DIN 43880): 1
- Frequency: 50 Hz
- Total power dissipated under nominal current conditions: 6.5 W
- Power dissipated per pole: 2.3 W
- Protected against tripping untimely: No
- Quick trip (Short time): No
- Electrical endurance in number of cycles: 2000
- Mechanical endurance in number of maneuvers: 4000
- Superior connection type for modular devices : Terminal with screws
- Tightening torque: 2.8 Nm
- Type of top clip for modular devices: Not applicable
- Type of DIN profile fixing clip for modular devices: Metallic
- Type of lower connection for modular devices: Double connection terminal
- Upper detachability for modular devices: No
- Lower detachability for modular devices: No
- Rigid cable connection section in screw terminals on the upper part: 1 / 25 mm²
- Connection section in flexible cable: 16 mm²
- Connection section. top terminals in rigid cable: 1 / 25 mm²
- Connection section of screw terminals in stud with flexible cable: 1 / 16 mm²
- Connection section of stud terminals with screw: 1 / 16 mm²
- IP protection index: IP20
- Differential protection type: AC
- Operating temperature: -25…40 °C
- Altitude: 2000 m

* All information in The datasheet