Differential switch 4P 40A 30mA type AC

Technical characteristics of the differential switch 4P 40A 30mA type AC:
- Neutral position: Right
- Number of poles: 4 P
- Mounting: DIN Rail
- Number of modules: 4
- Rated AC operating voltage: 230 / 400 V
- Type of supply voltage: AC
- Rated frequency: 50 Hz
- Rated insulation voltage: 500 V
- Maximum voltage of use: 440 V
- Rated impulse withstand voltage: 4000 V
- Rated differential current: 30 mA
- Rated rated current: 40 A
- Resistance to current wave 8/20µs: 0.25 kA
- Making and breaking capacity: 630 A
- Rated conditional short-circuit current Inc according to EN 61008-1: 6 kA
- Depth of the installed product: 70 mm
- Height of the installed product: 83 mm
- Width of installed product: 70 mm
- Construction dimensions (DIN 43880): 1
- Frequency: 50 Hz
- Total power dissipated under nominal current conditions: 6.5 W
- Quick trip (Short time): No
- Electrical endurance in number of cycles: 2000
- Mechanical endurance in number of maneuvers: 4000
- Tightening torque: 2.8 Nm
- Type of top clip for modular devices: Not applicable
- Type of DIN profile fixing clip for modular devices: Plastic
- Flexible cable connection section: 16 mm²
- Selective type : No
- IP protection index: IP20
- Differential protection type: AC
- Operating temperature: -25…40 °C
- Altitude: 2000 m

* All information in the technical sheet