DIM LED 3-4 wires dimmer Orbis

Main features of the 3-4-wire DIM LED dimmer switch:
- Small size for installation between pushbutton and mechanism box, or hidden in registers, false ceiling, etc.
- Short presses turn the lighting on and off. Long presses regulate the required light level.
- Quick installation without works or neutral connection.
- Memory function for ignitions at the desired level.
- Reduction of energy consumption in lighting and increase of the useful life of the lamps.
- Compatible with any pushbutton on the market.
- Allows its use in switched installations.
- Valid for any dimmable lamp, except 12 V DC LED with electromagnetic transformer.
- Built-in overload, thermal and short circuit protection.

Technical characteristics of the 3-4-wire DIM LED dimmer switch:
- Power supply: 230 Vac
- Nominal frequency: 50 Hz
- Own consumption: 0.035 VA
- Illuminated pushbuttons: No.
- Minimum regulation range: 10-30%
- Type of regulation: LAMP1 (end of phase) / LAMP2 (beginning of phase)
- Installation: Optional neutral (depending on the behavior of the lamp).
- Protection: Short circuit over current. Built-in Thermal Protection
- Degree of protection: IP 20 according to EN 60529
- Operating temperature: -10 to +50 ºC
- Maximum loads:
Incandescent: 150 W.
Halogens (230 Vac): 150 W.
Low voltage halogens (electronic transformer): 100 VA.
Low voltage halogens (electromagnetic transformer): 100 VA.
Low consumption lamps: 100 VA.
LED lamps (electronic transformer): 100 VA.
LED lamps (electromagnetic transformer): Not suitable.