Ceiling motion detector with 360º coverage Dinuy

- Motion Detector with PIR technology, for ceiling surface installation, indoors.

- It allows its installation together with slave detectors (up to 15 DM SEN T03) which allows to expand the coverage area.

- Automatic lighting control based on movement and natural light.

- Two output channels, allowing control of two different loads with independent timings

- Adjustable timing and brightness level using potentiometers or remote control (EM MAN DM0). Adjustable sensitivity by remote control.

- Maximum coverage of 360º and Ø7m, at 2.5m high.

- Possibility of storing the current brightness value (by remote control).

- Zero-crossing switching to protect the relays and to switch high lighting powers.

- Valid for all types of lamps including LEDs and Fluorescents.

- Supports contactor.

- Application example: offices, hotels, etc.

Features of the 360º coverage ceiling movement detector:

- Power: 230V ~ ± 10º% 50Hz

- Cutting capacity: 16A cosϕ = 1

- Maximum incandescent load: 3000W

- Maximum 230V Halogen load: 3,000W

- Maximum load Halogen MBT (Ferromagnetic): 2,400W

- Maximum Halogen Load MBT (Electronic): 3,000W

- Maximum Fluorescence Load: 1300W (100µF)

- Fluo-compact maximum load: 18x7w, 12x11w, 10x156w, 10x20w, 10x23w

- Maximum load LED lamps: 400W

- Maximum necktie: 360º - Ø7m at 2,5m high and 18ºC

- Timing: 6sec ~ 12min

- Brightness: 3 ~ 100Lux

- Operating temperature: -10ºC ~ + 45ºC

- Protection Index: IP40, Class II

360º coverage ceiling motion detector accessories:

- DM SEN T03 - Slave Motion Detector:

Slave motion detector, recessed in ceiling

It allows to expand the covered area by installing various sensors.

RJ11 telephone connection, which simplifies installation.

Possibility of connecting up to 14 slave sensors to a single master detector.

Includes a 5.5m long telephone cable.

Adjustable timing and brightness level using potentiometers or remote control (EM MAN DM0). Adjustable sensitivity by remote control.

- EM MAN DM0 - IR Remote Control for adjusting the Parameters:

IR remote control for adjusting the parameters of the detectors.

It allows the adjustment of: Timing and Lightness.

Mainly it provides 3 advantages: Savings in installation time, Same adjustments in all detectors in the same installation and cancels potentiometers, which avoids unwanted manipulations.