Electronic timer box Led Dinuy mechanism

The Dinuy Led mechanism box electronic timer has 2 modes of operation, selectable by means of a small switch:

- Resettable timer (Timer): acting on the button start the timing cycle. If the button is pressed again during the cycle, the timing is restarted.

- Timed remote switch (Switch): pressing the button starts the timing cycle. If during the cycle the button is actuated again, the timing is interrupted and it is disconnected.

Main characteristics of the electronic timer with Led mechanism box:

- Electronic timer for installation in a mechanism box.

- 2-wire connection, Neutral is not required.

- Valid for: Lamps LED, Incandescent and Halogen.

- Activation by non-illuminated pushbuttons.

- Built-in non-resettable thermal protection.

Technical characteristics of the electronic timer box with Led mechanism:

- Supply voltage: 230V~ 50/60Hz

- Own consumption: 0.7W

- Timing: 30sec – 10min

- Control: Pushbutton (does not admit illuminated pushbuttons

- Dimensions: 45x42x12mm

- Operating temperature: 0ºC ~ +40ºC

- Degree of protection: IP20, Class II

Valid for:

– 230V LED lamps: 4W ~ 80W

– 12V LED lamps (with electronic transformer): 200W (transformer)

– 230V incandescent and halogen lamps: 200W

– 12V halogen with electronic transformer: 200W

– 12V halogen with ferromagnetic transformer: Not allowed

– Fluorescence: Not allowed

– Fluo- compact: Not supported

– Motors: Pushbutton