Dinuy high frequency wall or ceiling motion detector

- Motion Detector, with High Frequency technology (radar), for hidden installation. It sends electromagnetic waves at 5.8GHz and receives its echo.

- A variation in the frequency of the reflected wave, caused by a moving object, is detected and interpreted by the sensor as movement and activates the connected load.

- Detection is possible through doors, glass, false ceilings, walls ... This implies a necessary adjustment in the limitation of the covered area to avoid false detections in adjacent rooms.

- The emission power of this sensor is less than 0.2mW, which is approximately 1% of the transmission power of a mobile or microwave.

- Timing, Brightness Level and Sensitivity adjustable by DIPs.

- Maximum coverage of 360º and Ø8m, at 2.5m high and 20ºC ~ 25ºC.

- Valid for all types of lamps, including LEDs and Fluorescence.

- Application examples: public toilets, elevators, etc.

High frequency ceiling or wall motion detector features:

- Frequency: 5.8GHz ± 75MHz

- Power: 230V ~ ± 10º% 50Hz

- Cutting capacity: 4A cosϕ = 1

- Maximum incandescence load: 800W

- Maximum Halogen load at 230V: 400W

- Maximum Halogen load at 12V: 400W

- Maximum LED load: 200W

- Maximum Fluorescence Load: 200W

- Maximum load PL and CFL lamps: 200W

- Coverage: 360º and Ø12m at 2.5m high and 20-25ºC

- Recommended installation height: 2.5m ~ 3m

- Timing: 5sec ~ 15min

- Brightness: 2Lux ~ 10Lux or 50Lux

- Sensitivity: Adjustable: 10% / 50% / 75% / 100%

- Operating temperature: -20ºC ~ + 60ºC

- Internal Consumption: <, 0.5W

- Transmission Power: <0.2mW

- Protection Index: IP20, Class II