Dinuy proximity and contactless pushbutton

The new Dinuy Proximity Pushbutton allows the activation of the lighting, or the opening of an automatic door, without the need for physical contact with the mechanism, simply by bringing the hand closer to it. With this solution it is no longer necessary to physically touch any surface to, for example, activate the lighting, thus reducing the risks of possible contagion.
It has three operating modes: resettable timer, impulse or remote switch. Likewise, the adjustment in the detection distance makes the solution very precise and effective, reducing unwanted activations, adapting its activation to the real needs of each installation. It also has a red LED that allows the proximity button to be located in the dark.
It incorporates a voltage-free relay that allows the control of all types of loads, from lighting to automatic door motors. In addition, it incorporates the control of the zero crossing in the relay, which allows the switching of large loads without the danger of the relay contact deteriorating.
Recessed installation compatible with standard mechanism box, using clamping claws. With white frame and translucent red interior area.
Characteristics of the proximity and non-contact button: - Reference: PT GAR PR1- Power supply voltage: 230V ~ ± 10% 50Hz- Own consumption: 0.5W- Cutting capacity: 16A cosϕ = 1LED lamps: 400W Incandescence and Halogens: 230V3000W Halogens with transformer Electronic: 3000W Halogens with Ferromagnetic transformer: 2400W Fluorescence: 1300W (130μF) Motors or Extractors: 200VA- Installation: In mechanism box, by means of clamping claws- Operating modes: Impulse, Relay or Timer- Timing: Impulse: 1sec Timer: 30sec - 10min - Detection distance: 5cm - 30cm- Dimensions: 80 x 80 x 45mm- Environmental Protection: IP20, Class II- Operating Temperature: 0ºC ~ + 40ºC