Unipolar 230V Dinuy contactor

- Impulse relay with 1 potential-free NO contact

- Flush mounting in register box

- Its output contact changes state each time its coil is powered through the button. That is, one press closes its contact and the next press opens it.

- Unlike a contactor, the remote control coil does not remain live and there is no permanent energy consumption

- Very low noise level, very quiet

- Application examples, hotel or hospital rooms, homes, corridors, etc ...

Features of the 230V single-pole remote control:

- Supply voltage: 230V ~ 50Hz

- Contact: Single Pole Switch NO

- Nominal Power LED Incandescence and Halogen Lamps 230V Halogen 12V with Fluorescence transformer: 10A / 250V ~ 400W2000W1000W600W (60µF)

- Consumption of the coil: In operation: 0W In the pulsation: 50mW

- Cutting capacity: 16A cos? = 1

- Number of illuminated buttons: Up to 3 (Up to 10 with Compensator)

- Minimum pulse duration: 0.05sec

- Minimum interval between pulsations: 0.1sec (maximum 20 per minute)

- Mechanical life:>, 1 million complete maneuvers

- Electrical life: With maximum load:>, 200000 maneuvers

- Dimensions: Without tabs: 46 x 32 x 19mm With tabs: 61 x 32 x 19mm

- Operating temperature: -20ºC ~ + 45ºC

- Environmental Protection: IP20, class II

- According to the Standard: UNE-EN60669-2-2