More informationThe new electronics of Ducasa's dynamic heat accumulators allow to obtain heat throughout the day (either in automatic or manual mode) with the advantage that electricity consumption only occurs during hours with a reduced rate, normally at night.
Main characteristics of the Ducasa 15/263 dynamic accumulator:
- Screen and raised buttons on the front
- Air inlet filters
- Tangential turbines in the lower part
- Electronic regulation
Technical characteristics of the Ducasa 15/263 dynamic accumulator:
- Model 15/263
- Reference 0.421.273
- Power 3000 W
- Dimensions 780 mm wide x 650 mm high x 275 mm deep
- Weight 169 kg
Components:
- 9 refractory high-density pheolite nuclei
- High efficiency thermal insulation
- Chromium-nickel armored heating elements
- Low noise tangential fan
- Heat resistant epoxy paint
- LCD screen with backlight
- Side electrical connections labeled
- Thermal protection limiters
- Possibility of connection of support resistance
- Electronics prepared for the reception of an external control (load center, electric company)
Installation details:
- Body mounting from the front
- Electrical connections with side access
- Hinged front panel with built-in insulation
- Laying bricks with easy access
- Possibility of fixing to apred.
Operating and usage specifications:
- Electronic charging thermostat with body sensor and room temperature sensor. Includes connection for the installation of a charging station
- Low temperature in the control elements thanks to the use of thermal insulation to protect all the components
- Prolonged heat transfer
- Bimetal controlled air mixing system, which provides a constant outlet air temperature, abating a more stable ambient temperature
- Automatic load reduction according to the reading values of the probes
- Constant or variable load adjustment
- Electronic system with self-diagnosis
- Safety limiter with manual reset
- Heat retention> 50%: category 3 appliance
- Pre-assembled resistors
- Neat and easily accessible electrical connections
.