Electronic countertop basin tap Nofer

Automatic single-water washbasin tap for countertop installation that is activated by an infrared sensor incorporated into it. The faucet works by means of electrical power at 220V 50/60 Hz or by 4 AA batteries that provide 6V in the event of a power failure. The body is made of chrome-plated cast brass under EN248 standard. Fixed spout with replaceable M24 aerator.

Electronic Countertop Basin Faucet Main Features:
- Automatic single water tap for washbasin.
- Suitable for areas of high frequency of use and high hygienic requirements
- Model for mounting on a sink or countertop.
- Opening by infrared sensor.
- Power supply by electric current or batteries.
- Robust vandal resistant construction in bright chrome plated brass.
- Supplied with fasteners and accessories

Technical characteristics of the electronic countertop basin faucet:
- Material: CW617N chrome plated brass body.
- Plastic components in POM.
- Chromed under EN248 standard.
- Activation by infrared sensor. Detection range 12 to 18 cm.
- It operates by connection to the electrical network using 4 AA batteries as a security backup.
- AC 220V - 50 / 60Hz / DC6V (4 AA batteries)
- Consumption in stand by: - Approximate battery life: 200000 cycles (2 years)
- Flow at 3 bar: 6 l / min. Also available 1.89 l / min (07260.LB).
- Working pressure: 0.5 - 6 bar.
- Working temperature: 1 - 80 oC.
- Maximum recommended temperature 60 oC.
- Plastic anti-particulate filter included.
- Operation: place your hands under the tap. This is activated automatically, remaining in operation as long as the hands are within the field of the sensor. The tap turns off after a few seconds of removing them.
- Maintenance: use neutral pH soap and water for cleaning, then dry with a clean cloth. When cleaning the bathroom with aggressive products, the soap dispenser must be protected from splashes.
- CE. Complies with the European Directives on Electrical Safety 2014/35 / EU, Electromagnetic Compatibility EMC 2014/30 / EU and Construction Products 305 / 2011UE according to the standards EN817: 2008 and EN 15091: 2013
- Dimensions: 142 mm high x 49 mm wide x 183 mm deep.