Geberit Duofix frame for 8cm wall hung toilet

Recessed cistern with front drive, fully insulated against condensation, with factory settings an immediate rear discharge is possible.
The pushbutton assembly and repair work on the concealed cistern can be carried out without tools, the connection to the water supply on top, side shifted to the left.
The pre-assembly box protects the register against moisture and dirt, it can be trimmed, suitable for flush pushbuttons
Equipped with a protection tube for the connection of Geberit AquaClean toilets-bidets
Frame with ø 9 mm holes for fixing in construction with wooden panel Self-supporting with 4x4 cm C-profile

Applications:

- For light wall mounting

- For installation on a full-height wall or in front of a partial-height wall

- For full height wall installation

- For wall-hung toilets with connection measures according to EN 33: 2011

- For wall-hung toilets with an extended projection of up to 75 cm

- For single, double volume or interruptible downloads

- For screed heights of 0–30 cm

Properties:

- Production series 2016

- Self-supporting frame with oven powder paint

- Frame with ø 9 mm holes for fixing in wood panel construction

- Frame suitable for ceramic toilets with small footprint (in case of pressure-resistant wall cladding)

- Galvanized support legs

- Support legs with continuous height adjustment

- Support legs with non-slip properties

- Support plate depth suitable for installation on UW 50 U-rail and Geberit Duofix rail track

- Drain elbow mountable without tools in different depth positions

- Drain elbow mountable vertically in front depth position

- Elongated drain elbow, for connection to the ground

- Fixing for acoustically insulated drain elbow

- Recessed cistern with frontal operation

- Built-in cistern fully insulated against condensation

- With factory settings immediate rinsing is possible

- Assembly and maintenance in the concealed cistern without tools

- Upper left supply connection

- Pre-assembly box for humidity and dirt

- Pre-assembly box that can be cut, suitable for flush pushbuttons

- Equipped with a guide tube for the water supply for connecting Geberit AquaClean bidet toilets

- With the possibility of fixing for electrical connection

Scope of supply

- Rp 1/2 "supply connection, MF compatible, with integrated square wrench and thread

- Pre-assembly box for registration

- 2 wall anchors

- Toilet hose set, ø 90 mm

- 90 ° PVC drain elbow, ø 90 mm

- PVC adapter sleeve, ø 90/110 mm

- 2 protection caps

- 2 M12 threaded rods

- Fixing material

Technical information:

- Dynamic pressure 0.1-10 bar

- Maximum water temperature 25 ° C

- Discharge volume, factory setting 6 and 3 l

- Total discharge, setting range 4.5 / 6 / 7.5 l

- Partial discharge, setting range 3-4 l

Complementary accessories:

- Geberit wall anchor set for individual mounting, for Geberit Duofix frame for wall-hung toilet, with cistern

recessed Sigma 8 cm

- Geberit Duofix leg extension set for screed height 20–40 cm