-48 %
1 / 3
7 Videos
SCALA2 G1 Grundfos self-priming booster set
Brand: GRUNDFOS
Reference: 98562862
Offer: £526.37
PVP: £1,003.94
Product sold out, not available at this time.
Next stock entry on the way, expected
Description
Grundfos SCALA2 G1 0.55kW self-priming pressure group, easy to install and incorporates components necessary to ensure adequate pressure at all times (image may differ from final product)
Details
More information
The Grundfos SCALA2 self-priming booster set is a compact booster set that supplies constant water pressure in domestic applications. SCALA2 incorporates a speed control that allows the proper pressure to be maintained in the taps, that is, the performance of the pump increases if the demand increases.
Installation can be carried out simply by following three basic steps: Connect pipes, prime the pump and plug the pump connector to the network. The pump is now ready to start working. SCALA2 incorporates all the necessary components to ensure adequate pressure: smart controller, integrated speed control motor, integrated tank, integrated sensors and integrated non-return valves .As it is a self-priming unit, SCALA2 can pump water below its level, it is capable of raising it from a depth of up to 8 meters in less than 5 minutes. This makes it easy to install and start up the pump and provides a reliable supply of water in installations where there is a risk of dry running or pipe leaks.
If exposed to dry running, lack of water or excessive temperature , pump blocked, in case of overload, the pump will stop automatically preventing the motor from burning out. In addition, the pump has an automatic restart system that in case of dry running or similar alarm, the pump stops. It restarts itself up to a maximum of 8 times every 5 minutes and a last attempt 24 hours after the incident.
Thanks to its hydraulic design, permanent magnet motor and water cooling, the pump has a noise level really low, 47 dB(A) in typical use, making it suitable for indoor and outdoor use. The maximum noise level at full load is 53dB (A). The built-in pressure tank reduces the number of starts and stops in case of leaks in the piping system, thus causing less wear on the pump.
SCALA2 does not require extensive maintenance, although it is recommended to keep the pump clean, check valves retention and keep the ventilation holes free of obstructions.
Characteristics of the SCALA2 G1 self-priming pump:
- Product: SCALA 2 3-45 A
- Reference: 98562862
- Nominal flow: 3 m3/h
- Nominal height: 27 m
- Maximum height: 45 m- Maximum horizontal distance: 50 meters- Minimum horizontal difference in level: 2º- Minimum sound pressure level: 47 dB(A)- Maximum sound pressure level: 53 dB(A)
- Curve tolerance: ISO09906:2012 3B
- Ambient temperature range: 0 to 55ºC
- Maximum working pressure: 10 bar
- Maximum allowed inlet pressure: 6 bar
- Pipe connection: G 1 Composite
- Pumped liquid: water
- Liquid temperature range: 0 to 45ºC
- Liquid temperature during operation Wind: 20ºC
- Input power - P1: 550 W
- Mains frequency: 50 Hz
- Rated voltage: 1 x 220-240 V
- Rated current: 2.8 A
- Degree of protection (IEC 34-5): IPX4D
- Insulation class (IEC 85): F
- Net weight: 9.55 kg
* Does not include fittings
Installation can be carried out simply by following three basic steps: Connect pipes, prime the pump and plug the pump connector to the network. The pump is now ready to start working. SCALA2 incorporates all the necessary components to ensure adequate pressure: smart controller, integrated speed control motor, integrated tank, integrated sensors and integrated non-return valves .As it is a self-priming unit, SCALA2 can pump water below its level, it is capable of raising it from a depth of up to 8 meters in less than 5 minutes. This makes it easy to install and start up the pump and provides a reliable supply of water in installations where there is a risk of dry running or pipe leaks.
If exposed to dry running, lack of water or excessive temperature , pump blocked, in case of overload, the pump will stop automatically preventing the motor from burning out. In addition, the pump has an automatic restart system that in case of dry running or similar alarm, the pump stops. It restarts itself up to a maximum of 8 times every 5 minutes and a last attempt 24 hours after the incident.
Thanks to its hydraulic design, permanent magnet motor and water cooling, the pump has a noise level really low, 47 dB(A) in typical use, making it suitable for indoor and outdoor use. The maximum noise level at full load is 53dB (A). The built-in pressure tank reduces the number of starts and stops in case of leaks in the piping system, thus causing less wear on the pump.
SCALA2 does not require extensive maintenance, although it is recommended to keep the pump clean, check valves retention and keep the ventilation holes free of obstructions.
Characteristics of the SCALA2 G1 self-priming pump:
- Product: SCALA 2 3-45 A
- Reference: 98562862
- Nominal flow: 3 m3/h
- Nominal height: 27 m
- Maximum height: 45 m- Maximum horizontal distance: 50 meters- Minimum horizontal difference in level: 2º- Minimum sound pressure level: 47 dB(A)- Maximum sound pressure level: 53 dB(A)
- Curve tolerance: ISO09906:2012 3B
- Ambient temperature range: 0 to 55ºC
- Maximum working pressure: 10 bar
- Maximum allowed inlet pressure: 6 bar
- Pipe connection: G 1 Composite
- Pumped liquid: water
- Liquid temperature range: 0 to 45ºC
- Liquid temperature during operation Wind: 20ºC
- Input power - P1: 550 W
- Mains frequency: 50 Hz
- Rated voltage: 1 x 220-240 V
- Rated current: 2.8 A
- Degree of protection (IEC 34-5): IPX4D
- Insulation class (IEC 85): F
- Net weight: 9.55 kg
* Does not include fittings
Videos (7)
Comments (14)
Questions (3)
Hola, a cuantos metros profundidad aspira el agua
Buenos días, este modelo puede aspirar hasta 8 metros de profundidad.
boa tarde qual e a altura de aspiração máxima? obrigsdo
Buenos días, la altura nominal máxima es de 45 metros.
Es realmente silenciosa?
Buenos días, el nivel de presión sonora máximo es de 53dB.
Best price
Have you seen it cheaper?
Related products
Similar products SCALA2 G1 self-priming pressure group Grundfos
See more products by Pumps for pressure increase
Find more products in
Our customers trust us
4.53/5 (2299 votes)
Fàcil instalación, bajo nivel de ruido, sistema compacto para viviendas unifamiliares.
Estoy muy satisfecho con esta bomba, he resuelto el problema de falta de presión. Puedo ducharme y abrir todos los grifos de la casa y el flujo de agua se mantiene con fuerza. En otras palabras, hace lo que dice que hace. Una bomba 5 estrellas.
***** Super Preis ***** Super Kauf ***** > Pumpe kam (aus Spanien) in nicht mal einer Woche. Sie sieht gut aus und wird hoffentlich ihren Zweck erfüllen.
angenehm überrascht von der Pumpe, sehr leise. Wird als Druckerhöhung in Einfamilienhaus mit ausgebautem Dachgeschoß, ohne extra Druckbehälter, verwendet. Nach den ersten Tagen sehr zufrieden mit der Pumpe, überall gleichmäßiger höherer Druck
Excellent service, rapidité, produit conforme. Société sérieuse. Très bien !!
Perfecta y facil d instalar
Llegó en perfecto estado y en poco tiempo. Fácil de instalar. Funciona correctamente.
Exatamente o que pedi, bom preço e entrega rápida
Bomba de presión silenciosa, compacta, muy buena estética y ajustable a las necesidades de presión que se necesiten en cada momento.
Porta una setmana instal·lada i funciona perfectament. Fa una mica més de soroll del que em pensaba però tampoc una cosa excessiva. Fàcil d'instal·lar, ocupa molt poc espai i pots variar la pressió de sortida. Molt satisfet amb la compra.
tudo óptimo
É um equipamento de fácil montagem e utilização. É uma boa solução para que tem oscilações na pressão da água.
Aquilo que esperava, produto de alta qualidade
El producto llegó un día antes de lo esperado. Aún no he podido instalar la bomba porque la persona que tenía que hacerlo no puede porque tiene mucho trabajo. Ya imformare cuando la pruebe.
How do reviews and ratings work?
The opinions and ratings of the products are mostly made by registered customers who have purchased the product. These reviews appear with a "verified purchase" mark. In any other case this mark does not appear. The rating of the product, out of 5 stars, is obtained with the average of all published reviews of the product. To ensure that the information is useful to other customers, comments and ratings, whether positive or negative, they are published after prior validation.