Circuit breaker GV2ME - 2,5 / 4A Schneider electric

Characteristics of the GV2ME - 2,5 / 4A magnetothermic circuit breaker:
- Range: TeSys
- Product name: TeSys GV2
- Device short name: GV2ME
- Device application: Motor
- Trip unit technology: Thermal-magnetic
- Number of poles: 3P
- Network type: AC
- Job category:
AC-3 conforming to IEC 60947-4-1
Category A conforming to IEC 60947-2
- Network frequency:
50/60 Hz conforming to IEC 60947-4-1
- Fixing mode:
35 mm symmetrical DIN rail: plugged in state 1
Panel: screwed on - cable type: with adapter plate)
- Operating position: Any position
- Motor power in kW:
1.1 kW at 400/415 V AC 50/60 Hz
1.5 kW at 400/415 V AC 50/60 Hz
1.5 kW at 500 V AC 50/60 Hz
3 kW at 690 V AC 50/60 Hz
2.2 kW at 500 V AC 50/60 Hz
2.2 kW at 690 V AC 50/60 Hz
- Cutting capacity:
100 kA Icu at 230/240 V AC 50/60 Hz conforming to IEC 60947-2
100 kA Icu at 400/415 V AC 50/60 Hz conforming to IEC 60947-2
100 kA Icu at 440 V AC 50/60 Hz conforming to IEC 60947-2
100 kA Icu at 500 V AC 50/60 Hz conforming to IEC 60947-2
3 kA Icu at 690 V AC 50/60 Hz conforming to IEC 60947-2
- [Ics] rated service breaking capacity in short circuit:
100% at 500 V AC 50/60 Hz conforming to IEC 60947-2
100% at 230/240 V AC 50/60 Hz conforming to IEC 60947-2
100% at 440 V AC 50/60 Hz conforming to IEC 60947-2
100% at 400/415 V AC 50/60 Hz conforming to IEC 60947-2
75% at 690 V AC 50/60 Hz conforming to IEC 60947-2
- Control type: Pushbutton
- [In] Nominal current: 4 A
- Thermal protection adjustment range: 2.5… 4 A
- Magnetic tripping current: 51 A
- [Ue] rated operational voltage: 690 V AC 50/60 Hz conforming to IEC 60947-2
- [Ui] rated insulation voltage: 690 V AC 50/60 Hz conforming to IEC 60947-2
- [Ith] Conventional thermal current: 4 A conforming to IEC 60947-4-1
- [Uimp] Resistance to voltage spikes: 6 kV conforming to IEC 60947-2
- Total power dissipated per pole: 2.5 W
- Mechanical durability: 100000 cycles
- Electrical durability: 100000 cycles for AC-3 at 440 V
- Maximum operating rate: 25 cyc / h
- Nominal service: Continuous according to IEC 60947-4-1
- Connections - terminals:
Screw clamp terminals 2 cable (s) 1… 6 mm² solid
Screw clamp terminals 2 cable (s) 1.5… 6 mm² flexible without cable end
Screw terminals 2 cable (s) 1… 4 mm² flexible with
- Tightening torque: 1.7 Nm on Screw terminals
- Switching power: Yes according to IEC 60947-1
- Phase failure sensitivity: Yes according to IEC 60947-4-1
- Measurements: 89x45x78.5 mm
- Product weight: 0.26 kg