Heat pump Nuos Primo 200 HC Ariston

Floor mounted compact heat pump. New standards of efficiency by using heat from the air as a source of renewable energy to obtain maximum comfort and high energy savings.

Anti-corrosion tank with double protection, an active electronic anode and a magnesium one. Anti-frost system that prevents the circuit from freezing, so Nuos can work in heat pump mode even with air at -5°C. Anti legionella system prevents the proliferation of bacteria through an automatic water heating cycle.

100% Guaranteed by Ariston
Each of the components has been developed to guarantee long-lasting performance and high efficiency, with the Ariston brand guarantee

100% Controlled and tested
Each Ariston product is rigorously tested in terms of quality, efficiency and safety before being delivered, our commitment to a superior result.
< br>100% Made to last
Resistant materials, components and products developed under the most extreme operating conditions to guarantee the best results for longer.

Main characteristics of the Nuos Primo 200 HC heat pump :
- Ideal for a family of 3-5 people
- Energy savings of at least 70% compared to a traditional electric water heater
- Reliable over time thanks to the protection of the titanium anode who acts c against corrosion and limescale
- Improvements in cop and heating time
- Working range in heat pump mode with air temperature between -5ºC and 42ºC
- Ecological gas R134a that allows reaching a temperature of water up to 55%C in heat pump mode
- Condenser outside the tank (not in direct contact with the water)
- Titanium vitrified steel boiler » Built-in backup electrical resistance
- Double anode , one active Protech that does not need maintenance and one magnesium
- Digital display
- Functions: GREEN, AUTO, BOOST, time programming and anti-legionella
- Prepared for night rate (includes rechargeable battery)
- Extend the warranty up to 3 years in total and 5 years in the boiler at Ampliaciongarantia.es

Technical characteristics of the Nuos Primo 200 HC heat pump:
- Nominal capacity: 200 litres
- Power average heat pump absorbed electricity: 500W
- SCOP air at 7ºC (EN16147): 2.71
- SCOP air at 14ºC (EN1 6147): 2.90
- Heating time, air at 7*C (EN16147): 6h 19min
- Heating time, air at 149C (EN16147): 5h 43min
- Max. water at 40ºC in a Single extraction (ENI8W47): 284 litres
- Maximum heat pump temperature: 55ºC
- Min/max air temperature: -5/42ºC
- Maximum absorbed power: 2,750W< br>- Nominal air flow: 400m3/h
- Minimum volume of the premises (Inst. without air ducts): 20m3
- Resistance power: 2,000 W
- Max. resistance: 75ºC (65 factory)
- Sound power (EN12102): 53 dB(A)
- Max. operating pressure: 6bar
- Refrigerant type R134A
- Refrigerant charge: 900 g
- GWP: 1430
- C02 equivalent: 1,287 tn
- Erp class: A
- Consumption profile: L

- Net weight: 87Kg
- Measurements: 1706x584x614mm

It is mandatory to install a 3/4” hydraulic safety group (Code 877085) and a siphon (Code 877086) for each unit.