Offer
1 / 2
HSS PointTeQ DIN338 4.0x43x75 metal drill set 2 units
Brand: BOSCH
Reference: 2608577161
Offer: £0.96
PVP: £1.89
Product sold out, not available at this time.
Next stock entry on the way, expected
Description
HSS PointTeQ DIN338 4.0x43x75 metal drill set 2 units, which quickly pierces the metal thanks to the PointTeQ point design. Drilling can be started quickly and easily thanks to the centering tip that prevents shifting.
Details
More information
HSS PointTeQ metal drill bit quickly drills through metal thanks to PointTeQ tip design
- Centering tip prevents shifting and allows you to start drilling quickly and easily
- Higher drilling speed generates less heat and wear
- PointTeQ tip design remains sharp and allows for continued durability
The HSS PointTeQ Metal Bit quickly drills through metal thanks to the PointTeQ tip design. Drilling can be started quickly and easily thanks to the centering tip that prevents shifting. Thanks to the higher drilling speed, less heat and wear are generated. The PointTeQ tip design remains sharp and allows for continued durability. This bit is suitable for drilling standoff holes and piles in steel and steel alloys, non-ferrous metals, cast steel, cast iron, and plastic. It has a cylindrical shank system (with insert shank the same diameter as the drill bit) and is intended for use with hand and bench drills.
The risk of breakage is low, especially for bits less than 6mm in diameter, as they are made with a highly elastic body. Black oxide coated groove facilitates quick chip removal. The HSS PointTeQ metal drill is manufactured according to DIN 338. The drill is type N (flute angle) with a point of 135 degrees.
Features of the HSS PointTeQ DIN338 4.0x43x75 metal drill set 2 units:
- Diameter: 4.00mm
- Working length: 43mm
- Centering tip prevents shifting and allows you to start drilling quickly and easily
- Higher drilling speed generates less heat and wear
- PointTeQ tip design remains sharp and allows for continued durability
The HSS PointTeQ Metal Bit quickly drills through metal thanks to the PointTeQ tip design. Drilling can be started quickly and easily thanks to the centering tip that prevents shifting. Thanks to the higher drilling speed, less heat and wear are generated. The PointTeQ tip design remains sharp and allows for continued durability. This bit is suitable for drilling standoff holes and piles in steel and steel alloys, non-ferrous metals, cast steel, cast iron, and plastic. It has a cylindrical shank system (with insert shank the same diameter as the drill bit) and is intended for use with hand and bench drills.
The risk of breakage is low, especially for bits less than 6mm in diameter, as they are made with a highly elastic body. Black oxide coated groove facilitates quick chip removal. The HSS PointTeQ metal drill is manufactured according to DIN 338. The drill is type N (flute angle) with a point of 135 degrees.
Features of the HSS PointTeQ DIN338 4.0x43x75 metal drill set 2 units:
- Diameter: 4.00mm
- Working length: 43mm
Comments
There are no opinions yet Be the first to review!
Questions
No questions yet Do you have any doubt?
Best price
Have you seen it cheaper?
Similar products HSS PointTeQ DIN338 4.0x43x75 metal drill set 2 units
See more products by Drill bits and sets
Find more products in
Our customers trust us
4.53/5 (2278 votes)