-84 %
IGA 2P 40A - Single-phase Permanent + Transient Overvoltage Protection
Brand: REVALCO
Reference: IGA10PT2P40EN
Offer: £40.60
PVP: £254.46
Product sold out, not available at this time.
Next stock entry on the way, expected
Description
Protection against permanent + transient single-phase overvoltages with mechanical/luminous status indication, dimensions of 3 modules (54 mm), intensity Imax of 15KA, manual reset. Complies with regulations: EN50550 / IEC61643-1.
Features
- Number of modules:
- 3
Details
More information
The equipment measures the voltage in the installation permanently and detects any increase in it, greater than 10% of the nominal voltage. In case of detecting said anomaly, it acts on the IGA (Automatic General Switch), disconnecting the voltage in the installation. The action time will depend on the level of overvoltage detected (according to the specifications of the EN50550 Standard).
The device will be operational again once it is manually reset, as long as the voltage is within its nominal values.
In the event that a transient overvoltage occurs, the equipment absorbs it, thus preventing it from causing any damage to the devices connected to the network (according to the specifications of the IEC61643-1 Standard).
Yes due to a transient overvoltage the protection will be inoperative, the module on the right will show the warning light in red. In such a case, the protective module will have been rendered useless, and must be replaced by another (plug-in: easy replacement).
Main characteristics of IGA 2P 40A - Protection against permanent + transient single-phase overvoltages:
- Device for protection against permanent overvoltages caused by increases in the network voltage, in single-phase installations.
- It also protects against transient overvoltages caused by lightning strikes or network switching.
- Formed by automatic general switch (IGA) + Protector Single-phase permanent overvoltages + transient protector.
Technical characteristics of the IGA 2P 40A - Protection against single-phase permanent + transient overvoltages:
- Nominal voltage: 230V AC
- Nominal frequency: 50 / 60Hz
- Maximum terminal section: 25mm2
- Compact with easy connection (3 DIN modules / 54mm)
- Dimensions (width x height x depth) mm: 54 x 86 x 71
- Protection: IP20
>- Class: Type II
- Mounting: DIN 35 rail
- Number of DIN modules: 3
- IGA rated current: 40A
- IGA curve: C
- Breaking capacity: 10 kA
- Intensity Imax: 15 kA
- Manual Reset
- Possibility of making it Auto-Reset
- Mechanical/luminous status indication
The device will be operational again once it is manually reset, as long as the voltage is within its nominal values.
In the event that a transient overvoltage occurs, the equipment absorbs it, thus preventing it from causing any damage to the devices connected to the network (according to the specifications of the IEC61643-1 Standard).
Yes due to a transient overvoltage the protection will be inoperative, the module on the right will show the warning light in red. In such a case, the protective module will have been rendered useless, and must be replaced by another (plug-in: easy replacement).
Main characteristics of IGA 2P 40A - Protection against permanent + transient single-phase overvoltages:
- Device for protection against permanent overvoltages caused by increases in the network voltage, in single-phase installations.
- It also protects against transient overvoltages caused by lightning strikes or network switching.
- Formed by automatic general switch (IGA) + Protector Single-phase permanent overvoltages + transient protector.
Technical characteristics of the IGA 2P 40A - Protection against single-phase permanent + transient overvoltages:
- Nominal voltage: 230V AC
- Nominal frequency: 50 / 60Hz
- Maximum terminal section: 25mm2
- Compact with easy connection (3 DIN modules / 54mm)
- Dimensions (width x height x depth) mm: 54 x 86 x 71
- Protection: IP20
>- Class: Type II
- Mounting: DIN 35 rail
- Number of DIN modules: 3
- IGA rated current: 40A
- IGA curve: C
- Breaking capacity: 10 kA
- Intensity Imax: 15 kA
- Manual Reset
- Possibility of making it Auto-Reset
- Mechanical/luminous status indication
Comments (3)
Questions
No questions yet Do you have any doubt?
Best price
Have you seen it cheaper?
Similar products IGA 2P 40A - Single-phase Permanent + Transient Overvoltage Protection
See more products by Revalco automations
Find more products in
Our customers trust us
4.53/5 (2282 votes)
Todo perfecto envío artículo
Servicio muy bueno, de un día para otro lo tenía en casa
Hace su función todo ok
How do reviews and ratings work?
The opinions and ratings of the products are mostly made by registered customers who have purchased the product. These reviews appear with a "verified purchase" mark. In any other case this mark does not appear. The rating of the product, out of 5 stars, is obtained with the average of all published reviews of the product. To ensure that the information is useful to other customers, comments and ratings, whether positive or negative, they are published after prior validation.