Kit memory key resistant

The memokey resistant kit, for autonomous anti-vandal access control by keyboard and proximity, allows the management of up to 600 users.
It includes an IP66/IK9 keyboard with an integrated controller with a narrow profile and small dimensions (ref.5293), 3 cards proximity switch (ref.52750), 2 key rings (ref.52740) and a 12Vac/1A power supply (ref.4802).

It has:
- 2A relay output configurable from 1- 99sg (5sg by default) or bistable (when presenting the card the relay is activated and when presenting it again, it is deactivated).
- Open door sensor input.
- Exit button input.
- Alarm Output- (negative output that allows activating a relay ref.2013).

This keypad allows up to 4 different types of access:
- Card only.
- Card+PIN .
- Card or PIN (default).
- Multicard, PIN. When presenting 2 to 9 valid cards or pins, the door will open.

The access code is entered by dialing 4 to 6 digits + #.

Multicard/PIN type access , requires several identifiers. For example, if it is programmed with 3 identifiers, in order to activate the door, the user will present his valid card and until the two additional cards pass through (example of the guards), the door will not open.

Each user is associated with an identifier number called ID (from 1 to 600).
Users with ID (from 1 to 598) are standard users, who, upon presenting a valid card or code, will open the door.
Users with ID (599 and 600) are panic users. These users, upon presenting their card or valid code, open the door and simultaneously activate the auxiliary output Alarm- for 1 minute or until a valid card or PIN is presented.

The keypad has a sensor input of door (can be activated or deactivated). If it is activated and the door is opened without previous authorization, the alarm will go off until a valid identifier is presented and the door is closed. It will also activate the alarm, if the door remains open for more than 1 minute, after valid access.

The keypad is supplied with two master cards that allow cards or key fobs to be registered or deleted, not codes . The codes are registered through the keyboard itself.

The kit can be expanded with a second keyboard (ref.5293) or with a WG26 proximity reader (ref.5296), adding an additional source of 12Vdc (ref.4813):
- The keypad can function as INTERLOCK (opening of a door with automatic locking of another).
- The reader (ref.5296) will act on the door itself.
< br>Mechanical characteristics of the memokey resistant kit:
- Material: Steel.
- Surface fixing system: Hidden screws.
- IP66 /IK 09

Technical characteristics of the memokey resistant kit:
- Power supply: 12Vca
- Operating temperature: [-20ºC, +60ºC]
- Humidity: [ 10%, 90%]
- Compatibility: EM (125KHz), MIFARE (13.56MHz) and HID (ISOProxII, 125KHz) cards/keychains.
- Configurable in Wiegand 26 proximity protocol and 8-bit burst keyboard format.
- Relay (autonomous) 2A (C, No, Nc)
- RF radiated power: 125KHz: 4.382dBuA/m, 13.56MHz: 2.02dBuA/m.

Technical specifications of the memokey resistant kit:
- Autonomous wiring: ~ (Red): Positive supply 12~28Vca/dc ~- (Grey&, black): Negative supply 12~28Vca/dc C ( White&,black), NO (Blue), NC (Green&,black): Potential-free relay. C_common, NO_Normally open, NC_Normally closed. GND (Black), SP (Brown): door sensor GND (Black), BS (Yellow): hall exit button Alarm- (Grey), ~(Red): alarm output <,200mA

Accessories not included:
- Ref. 1076 - Magnetic contact. door sensor.
- Ref. 5296 - Proximity reader resistant
- Ref. 5293 - Keypad w/prox resistant
- Ref. 5287 - Embedded pushbutton
- Ref. 5288 - Surface pushbutton
- Ref. 4813 - 12vdc/2a power supply
- Ref. 67501 - Univ. 990n-p22 10-24v max (normal operation lock release with short armor with adjustable latch)
- Ref. 4813 - 12vdc/2a power supply