Mini shunt 5 2400MHz Easyf 2D 21dB B Televés

Mini 2-tap tap and EasyF connection system, for SMATV signals. Due to its derivation losses (12dB), its installation on the first floor (type TA) is recommended.
Its innovative ultra-small size allows it to be installed anywhere, including small manholes. In addition, miniturization is also applied to the electronics that it incorporates and that improves its electrical behavior and reduces the effect of impulsive noise.
It is for indoor installation, but it is also suitable for outdoor use, always inside a box (ref. 417801).

EasyF connection system: simplicity and savings
The EasyF is an innovative concept of connection of the internal conductor of the coaxial cable (live), which is inserted directly into the device increasing the reliability of the connection. Furthermore, thanks to the absence of "F" connectors, it is possible to reduce the chassis and secure the connection of two cables with a single screw.
- Real time savings: speeding up the installation is possible, as it is not necessary to make the connectorization of the coaxial cables. In addition, the process of threading the connectors on the device is avoided, which is sometimes complicated when space is not enough
- Connection reliability: the cable tie that holds the cables prevents the coaxial from loosening
- Cost savings: no additional connector (neither "F" nor "CEI") is needed
- Space optimization: inputs and outputs are always located on the same side of the device, avoiding bending of coaxial cables and facilitating work inside cabinets and registers

With EasyF, the connection of the coaxial cable in the device is made by an automated system of insertion of the live (internal conductor) by contact, without requiring soldering.
Like the first day: the life of the device increases by eliminating the possible deterioration of the welds with the passage of time
Reduced failure rate: generally caused by cold welding
Optimization of electromagnetic behavior: at high frequencies
Reinforcement of our commitment to the environment: pollution caused by the welding process is eliminated and electricity consumption in production is reduced

Very simple assembly in three steps:
It is only required to screw and unscrew the caps to connect two cables:
1. Unscrew the cover of the device to access the connection
2. Insert previously stripped coaxial cables
3. Close the cover and screw to secure the connection

EasyF 2D 5 to 2400MHz 12dB mini-shunt main features:
- EasyF connection system: ease of installation and savings in assembly
- Made of Zamak, great armor
- High reliability: automated manufacturing with state-of-the-art microcomponents
- Improved loss of passage - Good electrical behavior: reduction of impulsive noise
- Includes grounding screw
- Bidirectional DC pass-through between pass-through input and output

* All technical characteristics on the attached file