Motion detector for Dinuy mechanism box

- Motion detector, with PIR technology, for mounting in a mechanism box, indoors.

- 2-wire installation (Neutral is not required), allowing direct replacement of a switch or a push button with minute hand.

- Adjustable timing and brightness level using potentiometers.

- It incorporates a brightness sensor, which allows it to be limited to the level of natural light that exists

- Coverage: 200º in 8m (max.) At 1.2 - 1.5m in height

- Automatic lighting control based on movement and natural light.

- Adjustments on the back of the sensor, which makes unwanted manipulations difficult.

- It incorporates two highly sensitive PIR sensors, which allow detection of the slightest movement.

- The «Pulse» function allows, in neighboring communities with a minute hand, to replace the existing buttons without changing the installation.

- Example of use: hallways, communities, bathrooms, etc ...

Features of the motion detector for mechanism box:

- Power: 230V ~ ± 10º% 50Hz

- Maximum Incandescence and Halogen load at 230V: 3 ~ 200W

- Maximum LED load at 230V: 3 ~ 100W

- Maximum load Halogen MBT (Ferromagnetic Transformer): 3 ~ 150W

- Maximum load Halogen MBT (Electronic Transformer): 3 ~ 100W

- Maximum Fluorescence Charge: 5 ~ 100W

- Fluo-compact maximum load: 5 ~ 100W (max. 8 lamps)

- Maximum load Extractors: 5VA ~ 50VA

- Maximum load Contactors: With excitation current>, 16mA

- Minuteros maximum load: With leakage currents per button>, 30mA (Dinuy ref: MI EL3 003 and MI EL3 004)

- Coverage: 200º in 8m (max) at 1.2 - 1.5m in height and 18ºC

- Timing: 30sec ~ 10min, Impulse 4sec

- Lightness: 3Lux ~ 100Lux, or Off

- Operating temperature: -10ºC - + 45ºC

- Internal Consumption: <, 0.2W

- Protection Index: IP40, Class II