Motion detector with inverted relay

Technical characteristics of the motion detector with inverted relay:
- Motion detector, with PIR technology, for recessed ceiling mounting.
- It has 1 output channel with a 16A relay, free of voltage, and normally contact closed.
- Reverse operating logic: turns off the lighting when movement is detected.
- A second timing allows lighting to be activated once movement is no longer detected and the set delay time has elapsed.
>- Maximum coverage of 360º and Ø7m, at a height of 2.5m.
- Zero crossing switching, which allows the protection of your relay and high power switching.
- Valid for all types of lamps, including LED and UV lamps.
- Application example: control of germicidal lamps for the disinfection of rooms or rooms.

Main characteristics of the movement detector with inverted relay:
-Input voltage Power: 230V
-Frequency: 50Hz
-Own Consumption: &l t;,1W
-LED lamps: 400W
-Incandescent and 230V Halogen: 3000W
-12V Halogen with electronic transformer: 3000W
-Halogen with ferromagnetic transformer: 2400W
-Detection Angle : 360º
-Mounting height: 2.5m
-Detection diameter: 7m
-Detection length: 0m
-Minimum time delay (seconds) T1 (detection delay): 1min / T2 (activation delay): 5min ~ 90min or cancelled
-Mounting: Recessed in ceiling
-Fluorescent Lamps (VA): 1,300W
-Allows contactor: Yes
-Zero crossing: Yes
-Operating Temperature (min): -10ºC
-Operating Temperature (max): 45ºC
-Environmental Protection: IP40