Cyclon Sensor hand dryer with push button and white steel housing Nofer

Characteristics of the Cyclon Sensor hand dryer with push button and white stainless steel housing Nofer:

- High-end hand dryer with electronic sensor.

- Model for surface mounting.

- Housing made of a single piece of AISI 304 stainless steel, 1.2 mm thick white finish.

- Suitable for communities and places with a very high frequency of use.

- Indicated for uninterrupted use. Top quality components.

- Robust, vandal resistant and safe because it is built without sharp edges or other dangerous elements.

- In accordance with European safety directives (CE).

- Housing made of a single piece of AISI 304 stainless steel, 1.2 mm thick, white epoxy painted finish.

- Electronic infrared sensor that stops the hand dryer when the hands are removed from the detection field

- Air outlet temperature at an ambient temperature of 20ºC, temperature: 53ºC at 10 cm.

- Universal type brushless motor (no maintenance required).

- Motor speed 6500 rpm

- Air flow speed: 117 km / h.

- Total power of 2450 W.

- Motor power: 250 W.

- Voltage / Frequency: 220-240 V - 50/60 Hz.

- Electrical insulation: Class I.

- Electrical protection of the motor: fuse. Electrical resistance protection: internal thermostat.

- Resistance overheating thermostat (automatic reset).

- Distance to the sensor: 0-20 cm (without the possibility of regulation).

- Maximum consumption of 10.6 A.

- Sound level at 2 meters: 70 dBA.

- Protection index against projections: IPX1.

- Dimensions: 240 height x 265 width x 210 depth (mm).

- Total net weight: 5.5 kg.

- Operation: place your hands under the appliance. The hand dryer is activated automatically, remaining in operation as long as the hands are within the field of the sensor. The appliance turns off after a few seconds of removing them.

- Cleaning: cleaning with a cotton cloth slightly moistened in a soapy solution is recommended. Then dry.

- Estimated drying time: 28 seconds.