Nuos Split Inverter heat pump 270 liters with wifi Artison

Split model wall-mounted heat pump provides maximum energy savings without loss of comfort. It offers a large amount of hot water thanks to its large capacity. The Nuos Split Inverter heat pump with Wi-Fi is designed with the new efficiency standards by using heat from the air as a renewable energy source to obtain maximum comfort and high energy savings.

With low noise level in all operating modes, anti-corrosion tank with double protection, one active electronic anode and one magnesium, anti-frost system that prevents the circuit from freezing, so Nuos can work in heat pump mode even with air at -5 °C and anti-legionella system that prevents the proliferation of bacteria through an automatic water heating cycle.

Main characteristics of the Nuos Split Inverter 270 liter heat pump with Wi-Fi:
- Energy saving of at least 75% compared to a traditional electric water heater
- Absence of noise inside the house
- Great installation flexibility
- Working range in heat pump mode with air temperature between -10 and 42°C
- R134a ecological gas that allows water temperatures to reach up to 62°C in heat pump mode
- Inverter technology
- Integrated Wi-Fi connectivity through the App Aqua Ariston Net
- Full touch HMI display
- Condenser outside the tank (not in direct contact with water)
- Reduced noise impact inside the house (external unit)
- Vitrified titanium steel boiler
- Double power sheathed ceramic electric resistance
- Double anode, one active PROTECH that does not need maintenance and one magnesium
- Functions: GREEN, COMFORT, I-MEMORY, BOOST , FAST, time programming. HOLIDAY, photovoltaic, anti-legionella and SILENT

Technical characteristics of the Nuos Split Inverter 270-litre heat pump with Wi-Fi:
- Nominal capacity: 270 litres
- Average heat pump absorbed electrical power: 700W
- Air SCOP at 7ºC (EN16147): 3.53
- Air SCOP at 14ºC (EN16147): 3.84
-Heating time, air at 7ºC (EN16147): 7h 37min
- Heating time, air at 14ºC (EN16147): 6h 39min
- Max. water at 40ºC in a single extraction (EN16147): 355 litres
-Maximum heat pump temperature: 62ºC
- Min./max. air temperature: -10/42ºC
- Max. absorbed: 2,500W
- Resistance power: 1,000+1,500W
- Max. resistance: 75ºC
-Interior sound power (EN12102): 15 dB (A)
- Exterior sound power (EN12102): 56 dB (A)
- Max. operating pressure: 6bar
- Maximum distance between refrigerant fluid joints (Without/With additional charge of refrigerant fluid): -12/20m
- Additional charge of refrigerant fluid: 25g/m
- Maximum difference in level of refrigerant fluid joints (outdoor unit installed above/below indoor unit): 10m
- Refrigerant type: R134A
- Refrigerant charge: 1,100g
- GWP: 1430
- CO2 equivalent: 1,573tn
- ErP class: A+
- Consumption profile: XL

- Indoor unit net weight: 76kg
- Outdoor unit net weight: 32kg
- Measurements: 1665x600mm

It is mandatory to install a 3/4” hydraulic safety group (Code 877085) and a siphon (Code 877086) for each unit.