PE5000 Sauermann peristaltic condensate pumps

Peristaltic pumps help to absorb charged condensates. They are among the most compact on the market, combining silence and practical and intelligent design: removable and replaceable heads and tubes = optimized maintenance and cost.

This peristaltic pump is controlled by a compressor signal from the air conditioner and stops after 3 minutes after compressor stop.

*These pumps should not run continuously. The PE5000 pump MUST NOT be installed in an INVERTER air conditioner

Main characteristics of the PE5000 peristaltic condensate pumps:
- Easy installation, compact pump, IP 65 protection (it does not require ventilation)
- Economical and simple maintenance: the replaceable head and the tube of easy access allow to reduce maintenance costs
- Silent operation
- High discharge height

Technical characteristics of the PE5000 peristaltic condensate pumps:
- Power supply: 230 V ~ 50/60 Hz - 11 W
- Maximum flow: 6 l/h
- Maximum suction height: 2 m
- Height maximum discharge: 12 m
- Noise level (measured in the Sauermann acoustic laboratory, pump installed and running with water): ≤ 30 dBA at 1m
- Protection: IP65
- Safety standards: CE
- Detection: Compressor signal
- RoHS directive equipment: Compliant
- WEEE directive equipment: Compliant
- Pump dimensions: 109 x 110 x 91 mm (length ud x width x height)
- Weight (with packaging): 1.0 kg approx.

Kit contents:
- PE5000 peristaltic pump
- 1.7 m cable formed for 2 power supply wires
- Sliding plastic plate
- PE5003 adapter to reduce the diameter from Ø15 to Ø6mm

Applications:
For air conditioning units up to 8kW, consoles, fan coils, roof units, evaporators