PicoKom power supply, for FImix 12V - 220mA, 1 Televes output

EasyF connection system: simplicity and savings
The EasyF is an innovative concept for connecting the inner conductor of the coaxial (live) cable, which is inserted directly into the device, increasing the reliability of the connection. Furthermore, thanks to the absence of "F" connectors, it is possible to reduce the chassis and secure the connection of two cables with a single screw.
- Real time savings: speeding up the installation is possible, as it is not necessary to make the connectorization of the coaxial cables. In addition, the process of threading the connectors on the device is avoided, which is sometimes complicated when space is not enough
- Connection reliability: the cable tie that holds the cables prevents the coaxial from loosening
- Cost savings: no additional connector (neither "F" nor "CEI") is needed
- Space optimization: inputs and outputs are always located on the same side of the device, avoiding bending of coaxial cables and facilitating work inside cabinets and registers

Find out more about the reliability of the EasyF system
With EasyF, the connection of the coaxial cable in the device is made by an automated system of insertion of the live (internal conductor) by contact, without requiring soldering.
- Like the first day: the life of the device increases by eliminating the possible deterioration of the welds with the passage of time
- Reduction in the failure rate: generally caused by cold welding
- Optimization of electromagnetic behavior: at high frequencies
- Reinforcement of our commitment to the environment: pollution caused by the welding process is eliminated and electricity consumption in production is reduced

Very simple assembly in three steps:
It is only necessary to screw and unscrew the caps to connect two cables:
1. Unscrew the cover of the device to access the connection
2. Insert previously stripped coaxial cables
3. Close the cover and screw to secure the connection

Main characteristics of the PicoKom power supply, for FImix 12V - 220mA, 1 output: - High performance switching power supply: consumption savings of up to 40%
- Very low consumption
- Ultra-small size and aesthetic design: installable in 100x100mm junction boxes
- EasyF connection system
- Fully automated manufacturing subjected to rigorous quality controls
- Screw on wall
- The through losses vary depending on whether 1 or 2 outputs are used

* All technical characteristics can be found in the attached file.