Power supply DIN-6 100-240VAC / 24VDC-2A Fermax

It is used to power the different equipments of a Fermax installation, built in self-extinguishing VO material. They include a set of covers to protect the connection terminals.

DIN-6 rail format to facilitate installation inside an electrical equipment box, or they can be screwed directly onto the wall.

The source cannot be connected directly to the bus, given the characteristics of the Bus 2 or DUOX Systems, since the power supply and the data go through the same wires. This requires the Connections Module.

The Feeder Connections Module must be connected directly to the bus with the shortest possible cable distance.

This module prevents the power supply from disturbing the operation of the rest of the signals that circulate through the system and it will also be the one that allows connecting more sources if the system requires it.

Characteristics of the DIN-6 100-240VAC / 24VDC-2A power supply:
-Dimensions DIN 6: 105x 90 x60 mm
-Input voltage: 100-240 Vac
-Output voltage: 24 Vdc
-Maximum output current: 2A
-Input protection: PTC and 2.3A fuse
-Output protection: Electronic limitation for overload and short circuit
-It has two operating indicator LEDs:
Led ON lit: indicates that the feeder is working.
Led OVERLOAD on: indicates maximum current exceeded, (it will be necessary to reduce the load of the installation or add additional power supply (s)).
ON + OVERLOAD led flashing: indicates short circuit.
- Food:
BUS 2 system: 24 Vdc
DUOX system: 18 Vdc
- Output current depends on the connected source. Sources up to 3.5 A.
- BUS 2 system input voltage: 24 Vdc.
- DUOX system input voltage: 18 Vdc.
- Weight: 0.375043 kg
- Measures of the packed product: 6.4x10.8x9.6cm