Premium CPE10 T b watertight heater Cointra butane gas

The heater connects directly to the 90º elbow.

Regulations under Nox: Since last September 26, 2018, all gas heaters put on the European market for the first time must have emissions below 56 mg / kWh. This new generation of Low NOx heater heaters from Cointra achieves an even lower level of emissions, just 33 mg / kWh in the 10 l / min models, well below what the regulations mark.

Modulating fan: A modulating fan is incorporated in the range of thermostatic watertight heaters, with which it is possible to ensure precise flame stability as well as to avoid possible blockages of the appliance in its operation. Being possible to have evacuation lengths of up to 10 m (9.5 m + elbow) in coaxial tube (Ø80 / 125 mm).

Refrigerated Burner: Exclusive refrigerated burner, designed and built in a specific way to be able to have a cooling of the flame base throughout its entire route, thus achieving a drastic reduction of NOx emissions to the atmosphere, maximizing its performance.

Maximum energy classification: This model obtains the maximum energy classification (A +) according to ErP regulations, which guarantees the greatest savings in gas consumption while maintaining maximum comfort.

Maximum safety: CPE-T gas heaters have a sealed combustion chamber and forced smoke extraction. Precise and continuous electronic combustion control (ECS system).

Inverter technology (modulating thermostatic): Precise and digital temperature selection. "Top Saving" system, which adjusts gas consumption according to the selected temperature. Allows you to select any flow at the desired temperature without having to mix with cold water.

Maximum possibilities of evacuation exits: Thanks to its modulating fan, as well as a studied design of its combustion chamber, the installation of these models allows evacuation lengths greater than other equivalent models of the competition.

Sound level below normal: Between 53 and 55 dBA versus a range of up to 58-63 in equivalent competitive models. A difference of 5 dBA reduces the noise by half.

Especially suitable for Solar Thermal Energy: Automatic modulation of power depending on the selected temperature and the input of water preheated by the solar energy system.

Minimum maintenance: Power supply (no batteries required).

Intuitive and easy-to-use control panel: pushbuttons for temperature regulation and multifunction LCD screen with temperature, operation and current power indicator.

Technical characteristics of the Premium CPE10 T n butane gas watertight heater with standard gas outlet kit:
- Energy rating: A +
- Load profile: S

- Gas: Butane

- Combustion chamber: Watertight

- Type of ignition: Electronic ignition to mains

- Litrage: 10 Liters

- DHW flow ΔTª 25ºC (l / min): 10.2

- Useful power (kW): Maximum 17.8 - Minimum 7.6

- Minimum operating flow (l / min): 1.5

- Minimum operating pressure (bar): 0.2

- Max. Length equivalent gas outlet (m): Ø 60-100 mm> ,, 3 m + 90º elbow Ø 80-125 mm> ,, 9.5 m + 90º elbow Ø 80/80 mm> ,, 65

- Protection index: IPX5D

- Water heating energy efficiency (ηwh): 71%

- Sound level (dBA): 53

- Measurements: 295x595x195mm

- Weight: 15kg

- Warranty: 2 years