Premium CPE10 T watertight heater in natural gas Cointra
Brand: COINTRA
Reference: V1516
Description
The Premium CPE10 Tn natural gas watertight heater with standard gas outlet kit includes: Corresponding Premium CPE 10 Tn Low Nox heater DOES NOT INCLUDE THE EXTRACTION TUBE
Features
- Gas type:
- natural
- Power in kW:
- 17
- Energy class:
- A+
- Flow (l / min):
- 10
Details
Regulations under Nox: Since last September 26, 2018, all gas heaters put on the European market for the first time must have emissions below 56 mg / kWh. This new generation of Cointra Low NOx heater heaters achieves an even lower level of emissions, at just 33 mg / kWh on 10 l / min models, well below regulatory standards.
Modulating fan: A modulating fan is incorporated in the range of thermostatic watertight heaters, with which it is possible to ensure precise flame stability as well as avoid possible blockages of the appliance in its operation. Being possible to have evacuation lengths of up to 10 m (9.5 m + elbow) in coaxial tube (Ø80 / 125 mm).
Refrigerated Burner: Exclusive refrigerated burner, designed and built specifically to be able to have a cooling of the flame base throughout its entire length, thus achieving a drastic decrease in NOx emissions to the atmosphere, maximizing its performance.
Maximum energy classification: This model obtains the maximum energy classification (A +) according to ErP regulations, which guarantees the greatest savings in gas consumption while maintaining maximum comfort.
Maximum safety: CPE-T gas heaters have a sealed combustion chamber and forced smoke extraction. Precise and continuous electronic control of combustion (ECS system).
Inverter technology (modulating thermostat): Precise and digital selection of temperature. "Top Saving" system, which adjusts the gas consumption according to the selected temperature. It allows selecting any flow at the desired temperature without having to mix with cold water.
Maximum possibilities of evacuation outlets: Thanks to its modulating fan, as well as a studied design of its combustion chamber, the installation of these models allows evacuation lengths greater than other equivalent models of the competition.
Sound level below normal: Between 53 and 55 dBA compared to a range of up to 58-63 in equivalent models of the competition. A difference of 5 dBA means a noise reduction in half.
Especially indicated for Solar Thermal Energy: Automatic modulation of the power depending on the selected temperature and the entry of preheated water by the solar energy system.
Minimum maintenance: Mains power supply (no batteries required).
Intuitive and simple operation control panel: Push buttons for temperature regulation and multifunction LCD screen with temperature indicator, operation and current power.
Technical characteristics of the watertight Premium CPE10 T n natural gas heater with standard gas outlet kit:
- Load profile: S
- Natural gas
- Combustion chamber: Waterproof
- Type of ignition: Electronic ignition to electrical network
- Litration: 10 Liters
- ACS flow ΔTª 25ºC (l / min): 10.2
- Useful power (kW): Maximum 17.8 • Minimum 7.6
- Minimum operating flow (l / min): 1.5
- Minimum operating pressure (bar): 0.2
- Max length gas outlet equivalent (m): Ø 60-100 mm>, 3 m + 90º elbow Ø 80-125 mm>, 9.5 m + 90º elbow Ø 80/80 mm>, 65
- Protection index: IPX5D
- Energy efficiency of water heating (ηwh): 71%
- Sound level (dBA): 53
- Measurements: 295x595x195mm
- Weight: 15kg
- Warranty: 2 years
Comments (9)
Questions (2)
kann man an der heiztherme auch einen heizkörper (radiator)anschliessen? Mit freundlichen grüssen !K. rathjen
Guten Morgen, an diesen Kessel können keine Heizkörper oder Heizsysteme angeschlossen werden. Es ist nur für Wasser.
Buenas tardes. He visto que tienen el mismo con dos referencias y precios diferentes, pero no soy capaz de saber cual es la diferencia. Podrían decirme cual es, por favor?
La diferencia entre los dos modelos está en el tubo de salida de gases. La referencia V1516 incluye un kit de salida estándar mientras que la referencia V1522 incluye el kit de salida de gases de reposición: en vez de adaptar el codo directamente al calentador, incluye un tramo de 20 cm de tubo vertical antes del codo. Esto facilita la sustitución de un calentador "antiguo" con la instalación ya hecha y compensar la diferencia de tamaño entre los calentadores, ya que los modelos actuales son mas compactos de dimensiones más reducidas.
Best price
Related products
Similar products Premium CPE10 T watertight heater in natural gas Cointra
See more products by Heaters
Find more products in
Our customers trust us
Todo perfecto
He podido poner el calentador a funcionar gracias a un vídeo que tiene Cointra en la red, gracias de todos modos, para mí ha sido de gran ayuda
Product kwam heel snel onbeschadigd aan! Hij is nog helaas niet aangesloten. Maar dat moet wel goed zitten.
Perfecto calentador con buenas prestaciones a un precio razonable. En mi caso era para sustituir por uno muy antiguo ya estropeado, y el tubo que que se suministraba no me ha servido por mi instalación, y he tenido que comprar otro tipo de tubo. Por lo demás muy contenta con la compra y con el vendedor ya que la entrega fue muy rápida.
Hola muy buenas estoy contentísimo con el calentador esta genial y marca española 😉 muchas gracias
Lo recibí martes pasado y hoy me lo instalaron,muchas gracias estoy muy contento volveré a comprar,un saludo 👋 desde vigo.
Muy contento,buen precio y rapida entrega Intalado y funcionando
Correctamente embalado, plazo de envío cumplido y el producto funciona perfectamente. Muy recomendable.
How do reviews and ratings work?
The opinions and ratings of the products are mostly made by registered customers who have purchased the product. These reviews appear with a "verified purchase" mark. In any other case this mark does not appear. The rating of the product, out of 5 stars, is obtained with the average of all published reviews of the product. To ensure that the information is useful to other customers, comments and ratings, whether positive or negative, they are published after prior validation.