Permanent and transient overvoltage protectors 4 poles 20A Toscano

Characteristics of the permanent and transient overvoltage protectors 4 poles 20A:

- Working voltage 240 VAC

- Frequency 50-60 Hz

- Maximum section in terminals 25 mm²

- Dimensions (width x height x depth) mm 162 x 90 x 71

- Weight 1022 g

- Environmental margins -20º… + 70º C / 80% RH

- IP20 protection

- DIN35 Rail mounting

- Number of DIN 11 modules

- Product standards UNE-EN 50550 / UNE-EN 61643-11 / UNE-EN 60898

Permanent:

- Trip voltage 265 VAC ± 2%

- Response according to standard

Transitory:

- Impulse intensity (10 / 350us) Iimp 12,5kA (L / N) 25kA (N / PE)

- Maximum discharge intensity (8 / 20μs) Imax. 50kA (L / N) 100kA (N / PE)

- Nominal discharge current (8 / 20μs) In 20kA (L / N) 25kA (N / PE)

- Response time due to overvoltage ≤25ns

- Protection level Up <1,5kV (L / N) / <1,5 kV (N / PE)

- Class I + II

IGA:

- Nominal current 20, 25, 32, 40, 50, 63 A

- Curve C

- Cutting capacity 10 kA

For the correct operation of the equipment, the phase must be connected to the “L” terminal and the neutral to the “N” terminal.

Do not install on lines without neutral.