-40 %
1 / 5
Proximity resistant kit
Brand: FERMAX
Reference: 5237
Offer: £175.79
PVP: £292.02
Product sold out, not available at this time.
Next stock entry on the way, expected
Description
Kit that includes anti-vandal proximity reader ref 5296, IR programming keyboard, external controller ref. 5276, 3 cards, 2 key rings and power supply ref. 4813. Management of up to 1000 users.
Details
More information
The resistant proximity kit includes a vandal-proof proximity reader, with a narrow profile and small dimensions, allowing its installation on doors with a narrow profile.
Allows you to manage up to 1,000 users thanks to the MINI autonomous external controller (ref.5276). This controller includes two MASTERS cards (HIGH/LOW) and an IR infrared keyboard for card and parameter programming, 3 proximity cards (ref.52750), 2 key rings (ref.52740) and a 12Vdc/2A power supply. (ref.4813).
MINI controller:
- 2A relay output. By default, it supplies 12Vdc between the GND, NO terminals. By changing some internal jumpers it becomes a dry contact. Configurable from 1-99 s. (5s by default) or bistable (when presenting the card, the relay is activated and when presenting it again, it is deactivated).
- Exit button input. GND, OPEN. The controller allows up to 2 different types of access when installing a proximity reader.
- Card only
- Multi-card. By presenting 2 to 9 valid cards, the door will open. Multi-card type access requires several identifiers. For example, if it is programmed with 3 identifiers, in order to activate the door, the user will present his valid card and until the two additional cards are passed (example of the guards), the door will not open.
Each user is associated with an identifier number called ID (from 1 to 999). This ID allows you to cancel a lost or stolen card, so it is important to make a list, assigning each user the corresponding ID.
- The controller is supplied with two master cards that allow registering or deleting cards or key rings. This kit can be expanded with a second proximity reader (ref.5296) that will act on the same kit relay.
Mechanical characteristics of the resistant proximity kit:
- Steel Appearance
- surface fixation. Concealed screws.
- IP66/IK9
Proximity resistant kit technical characteristics:
- Power supply: Autonomous 12 Vdc (9-24Vdc)
- Standby consumption: 12Vdc / 25mA
- Operating tempreatur: [-20ºC, +60ºC]
- Humidity: [10%, 95%]
- Compatibility: EM (125KHz), MIFARE (13.56MHz) and HID (ISOProxII, 125KHz)
- Wiegand 26 proximity protocol.
- RF radiated power: 125KHz: 4.382dBuA/m, 13.56MHz: 2.02dBuA/m.
Proximity resistant kit technical specifications:
- STANDALONE WIRING (with external controller ref. 5276) + DC (Red): 12Vdc supply positive GND (Black): 12Vdc supply negative D0 (Green), D1 (White): Wiegand 26 connection. LED (Brown): LED control BZ (Yellow): Acoustic signal.
Accessories not included:
- Ref. 1076 - Magnetic contact. door sensor..
- Ref. 5296 - Proximity reader resistant.
- Ref. 5287 - Embedded button
- Ref. 5288 - Surface button
- Ref. 67501 - Univ. 990n-p22 10-24v max (normal operation lock release with short armor with adjustable latch)
- Ref. 4813 - 12vdc/2a power supply
Allows you to manage up to 1,000 users thanks to the MINI autonomous external controller (ref.5276). This controller includes two MASTERS cards (HIGH/LOW) and an IR infrared keyboard for card and parameter programming, 3 proximity cards (ref.52750), 2 key rings (ref.52740) and a 12Vdc/2A power supply. (ref.4813).
MINI controller:
- 2A relay output. By default, it supplies 12Vdc between the GND, NO terminals. By changing some internal jumpers it becomes a dry contact. Configurable from 1-99 s. (5s by default) or bistable (when presenting the card, the relay is activated and when presenting it again, it is deactivated).
- Exit button input. GND, OPEN. The controller allows up to 2 different types of access when installing a proximity reader.
- Card only
- Multi-card. By presenting 2 to 9 valid cards, the door will open. Multi-card type access requires several identifiers. For example, if it is programmed with 3 identifiers, in order to activate the door, the user will present his valid card and until the two additional cards are passed (example of the guards), the door will not open.
Each user is associated with an identifier number called ID (from 1 to 999). This ID allows you to cancel a lost or stolen card, so it is important to make a list, assigning each user the corresponding ID.
- The controller is supplied with two master cards that allow registering or deleting cards or key rings. This kit can be expanded with a second proximity reader (ref.5296) that will act on the same kit relay.
Mechanical characteristics of the resistant proximity kit:
- Steel Appearance
- surface fixation. Concealed screws.
- IP66/IK9
Proximity resistant kit technical characteristics:
- Power supply: Autonomous 12 Vdc (9-24Vdc)
- Standby consumption: 12Vdc / 25mA
- Operating tempreatur: [-20ºC, +60ºC]
- Humidity: [10%, 95%]
- Compatibility: EM (125KHz), MIFARE (13.56MHz) and HID (ISOProxII, 125KHz)
- Wiegand 26 proximity protocol.
- RF radiated power: 125KHz: 4.382dBuA/m, 13.56MHz: 2.02dBuA/m.
Proximity resistant kit technical specifications:
- STANDALONE WIRING (with external controller ref. 5276) + DC (Red): 12Vdc supply positive GND (Black): 12Vdc supply negative D0 (Green), D1 (White): Wiegand 26 connection. LED (Brown): LED control BZ (Yellow): Acoustic signal.
Accessories not included:
- Ref. 1076 - Magnetic contact. door sensor..
- Ref. 5296 - Proximity reader resistant.
- Ref. 5287 - Embedded button
- Ref. 5288 - Surface button
- Ref. 67501 - Univ. 990n-p22 10-24v max (normal operation lock release with short armor with adjustable latch)
- Ref. 4813 - 12vdc/2a power supply
Comments
There are no opinions yet Be the first to review!
Questions
No questions yet Do you have any doubt?
Best price
Have you seen it cheaper?
Similar products Proximity resistant kit
See more products by Access control
Find more products in
Our customers trust us
4.54/5 (2310 votes)