Grundfos UP15-14BA-PM 80mm Comfort Pump

This pump can only be used in pressurized hot water systems. The part of the pump responsible for driving the water is hermetically separated from the stator by a spherical stainless steel separator element.

Grundfos COMFORT pumps have a specific design for domestic hot water recirculation systems in single-family and semi-detached homes. They offer minimal energy consumption and maximum comfort thanks to the exclusive AUTOADAPT control function.

Bearings made of exceptional quality materials. The motor can be removed from the pump housing, facilitating maintenance and replacement. Corrosion-resistant impeller, made of stainless steel, ethylene-propylene-diene rubber (EPDM), polyphenylene oxide (PPO), Teflon (PTFE) and graphite. Materials approved for use with potable water, including the bronze pump housing.

COMFORT 15-14 BA PM The high-efficiency Comfort PM range from Grundfos is designed for domestic hot water recirculation with a lead-free, potable water-safe housing for single-family and semi-detached homes powered by an efficient single-phase 12-pole permanent magnet motor.

The AUTOADAPT function has been developed for hot water systems sanitary with hot water tanks as the main heating source. In domestic hot water systems with integrated temperature control functions that allow the temperature of the recirculation pipe to be increased or decreased, Grundfos recommends using the COMFORT BX or COMFORT B ​​models. To enjoy all the benefits of the COMFORT AUTO model with AUTOADAPT function , Grundfos recommends installing the pump in systems with hot water storage tanks.

Advantages of the UP15-14BA-PM 80mm pump:
- The exclusive AUTOADAPT function allows savings of up to 48% thermal energy and 97% in motor energy consumption in a standard pump running continuously
- Flushing function
- Automatic legionella removal function (if system supported)
- Automatic detection for weekends and holidays
- Temperature control (can be selected with the button)
- Continuous operation (can be selected with the button)
- Quick and easy electrical installation thanks to the 1.5 m cable that incl. plug
- Dry running detection
- Easy-to-clean, lime-resistant spherical rotor
- Wear-free operation thanks to liquid-lubricated bearing No risk of leaks thanks to static seal
- Easy cleaning and maintenance thanks to easy detachment of pump head assembly, compatible with most other manufacturers' pump housings
- Lead-free, corrosion-resistant brass pump housing
- No shielding required additional for the motor thanks to the integrated electronic system of the motor

Characteristics of the pump UP15-14BA-PM 1x230V RP 1/2" 80mm:
- Liquid pumped: Water
- Liquid temperature range: 2 .. 95 °C
- Liquid temperature during operation: 60 °C
- Density: 983.2 kg/m³
- TF class: 95
- Approvals on the nameplate: CE,VDE,EAC,WEEE
- Pump casing: Brass
- Impeller: Composite
- Maximum working pressure: 10 bar
- Type of connection: Rp
- Pipe connection: 1/2
- Port to port length: 80 mm
- Max. input power: 7 W
- Mains frequency: 50 Hz
- Nominal voltage: 1 x 230 V
- Current at speed 3: 0.07 A
- Capacitor size - Operation: 0.6 µF
- Degree of protection (IEC 34-5): IP44
- Class insulation (IEC 85): F
- Net weight: 0.98 kg
- Gross weight: 1.08 kg
- Transport volume: 0.003 m³

* Does not include fittings